discussion of bev tp changes

[JimmyZ]

You're wasting your time. The T5 is going to be a doorstop very soon. Sucks seeing I loved the 3 I had up and running for many years.

[jets]

Why would it be a door stop, all the HD works, plus the guide channel is still SD on 91 TP 14228.

[auggie]

Why would it be a door stop, all the HD works, plus the guide channel is still SD on 91 TP 14228.

If HD is on 82, I keep hearing & people keep saying that 82 is Done or almost Done. ? Plus the fact that Dreamlinks are not
open source Software/Firmware, like some of the other FTA Receivers that are.

[jets]

They can say all they want but HD works here on a Dreamlink.

Thing about IKS overall is the low bandwidth, not everyone can stream IPTV, most but not all. In rural areas where I am high speed internet is only available by Starlink.

[anthonym41]

is anyone getting nfl sunday ticket if so what are the settings please

[squirtNcider]

They are up on T5 2500's are the channels.

[dishuser]

They can say all they want but HD works here on a Dreamlink.

Thing about IKS overall is the low bandwidth, not everyone can stream IPTV, most but not all. In rural areas where I am high speed internet is only available by Starlink.
you don't need high speed for iptv

[anthonym41]

They are up on T5 2500's are the channels.

are they on 82 or 91?

[anthonym41]

Is anyone else not getting channel 229 CTV Ottawa?

[ftafrank]

Doesn't scan in on my jynkbox or dreamlink t4

[anthonym41]

that is strange as I don't see why we wouldn't get ctv ottawa

[blackjack]

Well, I made a stupid mistake last night. I hadn't read this thread in awhile so I factory reset my Junxbox because I was trying to fix a network connection issue. I lost all my channels (obviously) and now half the TPs on 91 won't scan, just say SKIP as others have said. No matter how many times I try to do a manual scan.

Can someone who has 91 fully working on their Junxbox please upload a channel list file in the appropriate section and link it here? Thank you.

[dishuser]

Well, I made a stupid mistake last night. I hadn't read this thread in awhile so I factory reset my Junxbox because I was trying to fix a network connection issue. I lost all my channels (obviously) and now half the TPs on 91 won't scan, just say SKIP as others have said. No matter how many times I try to do a manual scan.

Can someone who has 91 fully working on their Junxbox please upload a channel list file in the appropriate section and link it here? Thank you.

make the tp changes and scan

[blackjack]

make the tp changes and scan
It's not that simple. I made the changes already :) People have been having lots of issues with 91 on Junxbox, with TPs just refusing to scan.

[blackjack]

Okay, I did a bunch of experimentation tonight on the Junxbox because I had some free time. This assumes you already have all the right frequencies, changed everything to 21500 TURBO, and you get a blue/green signal intensity/quality lock after a few seconds when you go to the TP in the list - but still, if you auto scan, half or more of them just say SKIP.

First of all, no matter how many times you manual scan a TP, it's never going to work, I think. I tried 10 times each on about 8 different TPs, and never got a single lock.

However... If you just keep doing an auto scan over and over on 91, you might have some luck like I did. I'm not talking once or twice, I'm talking a dozen times or more. I also had "Network Search" on, no idea if it makes a difference. Each time you do a scan it adds to your existing channels anything new it has found, it doesn't remove the old ones.

Which TPs it locks on to in a given scan seems to be up to completely random chance.
You're going to probably feel like an absolute fool like I did when doing this, but I am 100% serious when I say this worked for me.
I kept some notes of which TPs came in on each scan, and what the TV channel total was for that scan pass, so I could easily see if what I was doing was changing anything, and it was. I recommend you do the same so you feel slightly less insane.

Here are my notes. This information is useless to you unless you are just curious.

PASS 1 2,4,8,11,13,14,17,19,22,24,26,28,30,33 (forgot total)
PASS 2: 2,4,6,11,13,14,16,20,22,24,26,29,31,33 TOTAL 252
PASS 3: 2,4,6,8,10,12,13,14,16,20,23,25,28,30,33 TOTAL 288
PASS 4: 2,6,8,13,14,17,22,24,26,31,33 TOTAL 179
PASS 5: 2,4,6,8,12,13,14,18,20,22,26,28,30,32,33 TOTAL 287
PASS 6: 3,5,7,10,12,13,14,19, - AND then the damn box randomly rebooted itself lol
PASS 7: 2,5,8,10,12,13,14,18,20,23,26,28,30,33 TOTAL I forgot to look at it but it was about 240?
PASS 8: 2,8,10,13,14,17,19,21,23,25,27,31,33 TOTAL 236
PASS 9: 11,13,14,16,18,21,23,26,28,33 TOTAL 186
[At this point I am beginning to cancel the scan whenever I get above 15, because the only missing TPs are 1,3,7,9, and 15.]
PASS 10: 2,4,6,13,14 CANCEL
PASS 11: 2,11,13,14 CANCEL
PASS 12: 2,10,12,13,14 CANCEL
PASS 13: 3,5,10,13,14 CANCEL
PASS 14: 4,7,9,11,13,14 CANCEL
PASS 15: 7,11,13,14 CANCEL
PASS 16: 3,5,7,10,13,1 CANCEL

By Pass 16, I got tired of doing it. I am still missing TP 1 (12224V) and TP 15 (12474H). I remember there never being anything on TP1 I think, but I don't know about 15.
I can tune in all the channels I have scanned in, but some of them do take awhile to tune in, they even say no signal for about 10 seconds before finally getting a lock, and then they are stable.

My educated guess as to what's happening, at least for me, is that the signal from some of the TPs is marginal, and it's taking the box too long to get a lock on them when scanning. Sometimes it just happens to get a lock a bit faster on some of the ones it missed last time, and that's why they randomly start working. Also explains why it takes awhile to tune the channels, and also if you look at the TP in the list it takes a good 5-10 seconds to show the good SQ/intensity. I have no idea why this just started happening to a bunch of people recently, though, when it worked fine for a good while.

Let me know if this works for you. If it doesn't, I'm sorry for wasting half an hour of your day.

[df2002]

Yup, going through a very similar experience.

I know that you mean.... took me 4 tries and then magically a few missing channels were added. It seems to be a slightly different result every single scan.

[dishuser]

do you have the option to scan a tp individually?

[The Noof]

do you have the option to scan a tp individually?

Yes DU, but the scans are dead:no channels on any transponder using transponder scan.Only sat scan pulls channels.

[jets]

I too made the mistake of deleting all channels on an original Jynxbox lite. I too ran into the "SKIP" problem.

I remember back in the day scanning I think old SD Viewsats. You had to scan certain TPs and sometimes site on a channel then continue to scan. I was like the box was discovering or building the "channel map".

I think the same thing applies here but you may have to do an auto scan in the JB? Just thinking out loud here. You may do well st sit on the channels that do scan and try again.

I will give it a whirl in a few days maybe Sunday if I find time.

[df2002]

Yesterday I scrubbed my Junxbox channels and started all over again.

As blackjack posted, you will need to re-scan 91w several times to get a full channel list. For me it was 5 attempts to get everything that seems possible to obtain at this point.

You will get random OK and SKIP each time, but eventually you can get nearly every transponder scanned in. It is helpful to keep a scorecard to check off when you get an "OK" on each transponder number, almost like playing Bingo, lol.

I ended up with very similar results to blackjacks results...... I cannot get TP1 and I think it was TP15 even after multiple scans.

82w seems to scan perfectly in 1 try.

[jackson]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson

[auggie]

The T5 is Basically a Door stop now, can't handle the changes that are ON GOING
I have shelved mine & currently using my SV8000HD

[dishuser]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson
t5 doesn't work and you ask if you should switch? :okay:

[df2002]

Hey lost all channels on my DL t5 (I have a sonic view HD and a jynxbox too but not using currently) was only watching 82 only so didn't switch
have scanned several times no luck
Should I switch receivers and scan?
or just go with IPTV now (I really like IKS so don't want to)
any help would be greatly appreciated
thanks
Jackson

I've made the switch from Dreamlink to a Junxbox.
After getting a Jynx/Junx configured and scanned in, it will do the job as a full replacement to what you had with Dreamlink.
At this time you'd need to use both 82 and 91 to get a full channel list. However, this is changing almost weekly as channels keep getting pulled from 82 and added to 91.

[john deer]

First of all thanks to blackjack for his post and info, it worked for me on my old jynxbox ultra hd v30. I get strong locked signals on all transponders and many stations with auto scan. My issue is that I get many duplicate station numbers and on some stations only sound no video. Should I delete all stations and start over? Any suggestions would be appreciated

[df2002]

First of all thanks to blackjack for his post and info, it worked for me on my old jynxbox ultra hd v30. I get strong locked signals on all transponders and many stations with auto scan. My issue is that I get many duplicate station numbers and on some stations only sound no video. Should I delete all stations and start over? Any suggestions would be appreciated

I am using Junxbox, which from my understanding is a Jynxbox clone. So menus should be the same.

If you go to menu, channel and TV channel list..... you will see all your channels on that page including the duplicates.
For duplicates, one will be on 91, and the other on 82 (nimiq 4).
When you click on each channel, you will see the transponder information so you will know which one is which. The working (91) channel should come up live display in the top corner, the other channel (most likely 82 nimiq4) will stay black.

You can manually EDIT and DELETE the duplicate Nimiq4 channels from this page without having to start all over.

This will probably be a weekly event as channels keep getting shuffled over to 91. A good practice seems to be to run a few separate 91 scans and then go into that channel menu and look for duplicates. This means the channel has moved over to 91, and you can remove it from 82.

[shedevil]

anybody knows why I see Nimiq1 instead of Nimiq6 for 91 sat? when I scan 91 I have many TPs skipping so I dont get many channels on 91

thanks

[auggie]

anybody knows why I see Nimiq1 instead of Nimiq6 for 91 sat? when I scan 91 I have many TPs skipping so I dont get many channels on 91

thanks That's not unusual, my SV8000HD Says Galaxy (91W) For Nimiq 1,3 under Sat heading or Dish Settings

I believe that's in the software, which hasn't been updated EVER or For a long time. Also have you made "ALL" the TP changes
that are needed Now for Sat. 91, Bev is STILL Mucking with things (82 channels to 91) etc. and aren't done till 82 Sat. is "HISTORY", That's my Take on it anyways ?

[shedevil]

That's not unusual, my SV8000HD Says Galaxy (91W) For Nimiq 1,3 under Sat heading or Dish Settings

I believe that's in the software, which hasn't been updated EVER or For a long time. Also have you made "ALL" the TP changes
that are needed Now for Sat. 91, Bev is STILL Mucking with things (82 channels to 91) etc. and aren't done till 82 Sat. is "HISTORY", That's my Take on it anyways ?


thanks Auggie, yes I did all the changes in the TPs. At first I scanned 91 and got the few channels that moved from 82 to 91 but since we moved the dish to get a better signal with 91 and lost 82, now when I scan 91, I am not getting any new channels and most TP are just skipping. Damn Bell

[auggie]

You may need to scan 4 or more times to pickup extra channels possibly ?

With all the changes going on, it is a "Work In Progress" with the Remaining FTA receivers that are LEFT.

[john deer]

The only channel that I am missing so far that is important to me is NBC east. Does anyone know what channel number it is on or transponder information

[ftafrank]

I get it on channel 2280 on my jynxbox. Transponder 12355 bell 91

[j11362]

got a jynx box lite,installed the 1.11 bin and factory reset got all the channnels on 91 after transponders changed.try it worked for me.

[anthonym41]

J1 any pics for proof don't wanna delete everything for nothing

[stagalee]

Good morning, can someone please post the process how to delete the duplicate channel on the jynx box. thank you.

[df2002]

If the jynx is similar to the junx:
For duplicate channels, try going to MENU, CHANNEL and TV CHANNEL LIST.
You should see a screen with all your channels, including the doubles.
On a channel you don't want, you can press the blue EDIT and then the blue DELETE.
When you exit that screen the selected channels to be deleted are removed. (You can delete multiple channels before exiting).

Also, if you aren't sure which one to delete, 1 channel should have an active display in the corner when selecting it, the other channel will not. And generally, it will be the Nimiq4 that will be the double.

[haywire]

recently got a jynxbox to try (was on dreamlink t5) my dish only points to sat 82 (its winter and cant re-point or add another LNB in the winter)

I tried doing a scan and many channels come in but missing a few that i was looking for.
Particularly 'Vision TV' and 'CP 24'
according to lyngsat
Vision TV is 12297 L tp 6 SR 21500 FEC 2/3
CP 24 12618 L tp 28 SR 21500 FEC 2/3

Might anyone be able to share if the channel is gone or if there is a way to get it back? (it has been gone for about a month for me, maybe more) I thought getting a jynxbox would help.



another question, what is the preferred box, the jynxbox or the nfusion HD? is there any advantage of one over the other?

[auggie]

Lyngsat is Not up to date with all the TP changes and such Going on.

[michaelh]

CP 24 channel 1566 is in my EPG here on 82 but does not come in. Black screen. Transponder does comes up as 12618 H. Vision channel 1161 on 82 transponder 12297 H same way. does not come in. Both working on 91.

[john deer]

I have a NFusion HD with all transponder changes made for 91. PM me for details

[jets]

I have a NFusion HD with all transponder changes made for 91. PM me for details

Why not post a list here so everyone can read it.

[dishuser]

Why not post a list here so everyone can read it.

they hijacked this thread
they're selling it

[stagalee]

I am trying to get city tv toronto but cant get this channel, anybody know which tp its on and it is H or V. i am using a jynx box.
Thank you.

[auggie]

I am trying to get city tv toronto but cant get this channel, anybody know which tp its on and it is H or V. i am using a jynx box.
Thank you.

TP=12326 H Channel 214 91w

[stagalee]

Thanks auggie much appreciated.

[haywire]

i am aware lyngsat is not up to date.. but i need to build a channel list for a jynxbox from scratch because i had a dreamlink t5 which i can no longer use. I got a junxbox from aliexpress but need to put in my own transponders.

Does anyone have a list of transponders? i see that some of the transponders on lyngsat are quite old and may not be accurate.

Where is the best place to see all the transponders?


Also another question, i see in some files i downloaded.. that lyngsat might say the frequency is 12268 but a channel list i downloaded has it entered as 12267. what is the purpose someone would enter the frequency 1 number off.. some of them are the same. but a few of them are off a couple numbers.


Where do i find a list of transponders to put into my junxbox.

[mirove]

i am aware lyngsat is not up to date.. but i need to build a channel list for a jynxbox from scratch because i had a dreamlink t5 which i can no longer use. I got a junxbox from aliexpress but need to put in my own transponders.

Does anyone have a list of transponders? i see that some of the transponders on lyngsat are quite old and may not be accurate.

Where is the best place to see all the transponders?


Also another question, i see in some files i downloaded.. that lyngsat might say the frequency is 12268 but a channel list i downloaded has it entered as 12267. what is the purpose someone would enter the frequency 1 number off.. some of them are the same. but a few of them are off a couple numbers.


Where do i find a list of transponders to put into my junxbox.

lyngsat is accurate for the transponder frequencies ... there is only 32 transponders on that satellite and the frequencies are fixed

[anthonym52]

can someone tell me the settings for TSN 1 And TLC someone told me the tsn settings but it isn't working any help would be appreciated

[auggie]

can someone tell me the settings for TSN 1 And TLC someone told me the tsn settings but it isn't working any help would be appreciated

If using a jynxbox you may have to scan Many times (lots) to pick up the channels you are missing etc.