Log in

View Full Version : change tps


gig63
02-08-2025, 02:09 AM
Well my mother was loosing a lot of channels she watched so I started with sat91 got nothing for channels
I've done some reading and i think i did it right for 91
I tried editing transponders but it wouldn't let me so I added transponders to list with these changes
for sat92
Transponders 12224 to 12676 vertical or horizontal as shown
symbol21500
FEC 3/4a and turbo 8psk
Dose this appear right
ad for 82 what should the settings be

Thank you everyone for your time
auggie
02-08-2025, 02:34 AM
For Sat91 you are correct except for TP's 15&16 Fec=2/3 (for me anyways)
For Sat82 all TP's are symb=21500 Fec=3/4a Turbo 8psk except for TP # 16 symbol=20000 Fec=Auto qpsk (for my setup)
Spliceguy
02-09-2025, 04:51 AM
For Sat91 you are correct except for TP's 15&16 Fec=2/3 (for me anyways)
For Sat82 all TP's are symb=21500 Fec=3/4a Turbo 8psk except for TP # 16 symbol=20000 Fec=Auto qpsk (for my setup)

My friend says that for him, 2/3 works on 82. 3/4a does not. And that is with same receiver.
dishuser
02-09-2025, 05:22 AM
My friend says that for him, 2/3 works on 82. 3/4a does not. And that is with same receiver.

maybe using different software
gig63
02-09-2025, 05:24 AM
For 82 its all 2/3 for 91 is 3/4a
Calmsurfer
02-14-2025, 02:09 PM
My SVHD TPs for Nimiq 4 have been on 21500, FEC-2/3 Turbo-8 for ever. But with the moving of channels, many are no longer coming in. I tried changing the FEC to 3/4a but to no luck. Not sure what my next move is. I cannot do a blind scan on the external module.
auggie
02-14-2025, 03:35 PM
My SVHD TPs for Nimiq 4 have been on 21500, FEC-2/3 Turbo-8 for ever. But with the moving of channels, many are no longer coming in. I tried changing the FEC to 3/4a but to no luck. Not sure what my next move is. I cannot do a blind scan on the external module.

Many have moved to 91, and more to follow till 82 is Done (end of life)
Calmsurfer
02-15-2025, 05:06 PM
I am sorry, I obviously misread. I thought it was 91 which was being removed. Ok, so it's 82. Okay, time to reposition. I haven't had to point a dish for several years. Have to find my meter.
Thank you Auggie.
auggie
02-15-2025, 05:16 PM
I am sorry, I obviously misread. I thought it was 91 which was being removed. Ok, so it's 82. Okay, time to reposition. I haven't had to point a dish for several years. Have to find my meter.
Thank you Auggie.

Just go to dishpointer.com put in your location & it will show you where to point Dish