Getting 91 Freqencies/Transpoders to work - H vs V

[haywire]

Wondering if anyone might be able to share some insight.

I am trying to get CP 24 on 91 ch503 to work on my jynxbox.

Lyngsat states CP 24 is on freq 12355 L tp 10

On the Jynxbox I manually added 12355Mhz with 21500Ks/s V with 8PSK

Another user NorthernPike stated that - on lyngsat R=V & L=H for the jynxbox
So lyngsat states it should be H. (I know lyngsat isnt up to date)

But when put the frequency on 'H' i cannot get a frequency lock; but if i put it on 'V' I do. But if I try and do a manual scan for that frequency. i don't see any channels when i scan ( I have tried scanning 10+ times)

Is there any advice on how to setup the transponders/frequencies properly?
Is there a channel list I can just import into my box?


If it helps i have JynxBox v30
loader version 1.2.20
hardware version 1.0.3
database version 1.0.1
firmware 4.0.02

Is it possible I'm using the wrong LNB? it previously worked fine with my dreamlink v5 and was able to get all channels on 82.

I removed the DISEQC switch and have the JynxBox directly plugged into 91 LNB.

[runamok]

You were getting help here

https://www.satfix.to/showthread.php?232112-H-or-V-on-lyngsat