DP-33 and 34

[TurboPirate]

Hello guys, with the new Echo*14 came new dish and switch, now we have a 30Inches dish with a Y adapter for 2 LNBs, 1 for 119 and 1 for 110, so I did a few installations and tried an FTA receiver with this new switch, DP-33, receiver in antenna settings recognize 110 with diseq and legacy switch in OFF mode, but 119 not recognize with any settings, diseq nor Legacy switch, What can be done? Thanks in advance TURBO.

[n3uspeed2]

Hello guys, with the new Echo*14 came new dish and switch, now we have a 30Inches dish with a Y adapter for 2 LNBs, 1 for 119 and 1 for 110, so I did a few installations and tried an FTA receiver with this new switch, DP-33, receiver in antenna settings recognize 110 with diseq and legacy switch in OFF mode, but 119 not recognize with any settings, diseq nor Legacy switch, What can be done? Thanks in advance TURBO.

LNBFs
The DPP33 Switch can be used only with:
• DISH Pro LNBFs
• DISH Net Bandstacked FSS and DBS LNBFs.

It is not compatible with:
• DISH Pro 21Switch
• Legacy Switches


Dp 34

Can only be used with DISH Pro LNBFs (DISH Pro Twin LNBF for two orbital locations (110° and 119°), DISH Pro Twin LNBF with a DISH Pro Single LNBF for three orbital

[TurboPirate]

LNBFs
The DPP33 Switch can be used only with:
• DISH Pro LNBFs
• DISH Net Bandstacked FSS and DBS LNBFs.

It is not compatible with:
• DISH Pro 21Switch
• Legacy Switches


Dp 34

Can only be used with DISH Pro LNBFs (DISH Pro Twin LNBF for two orbital locations (110° and 119°), DISH Pro Twin LNBF with a DISH Pro Single LNBF for three orbital

Thanks N3uspeed, but that I know, what I want to know is what settings do I need to do in the FTA receiver in order for this receiver to show me quality in both sats, Subs work great but FTA receiver only recognize 110, 119 no quality and 1% strength.

[Mavrick]

Are you running the DN sub at the same time as the FTA receiver to the DP33, you could be runnning into a power issue if just having the FTA connected by itself.

[The Wufman]

To my knowledge guys fta receivers will not work properly with the DP33...the only DP switches they do work with are the DP34 and DPP44....the dual tuner SV360 if I remember right will however work also with a DP21

[1boxman]

Had some trouble getting 119 myself on a vsmax..Kept telling me it was 110 or no sat .no matter what switch i used.
I had to bump up the tp in order to see 119.
move up from 12239 .

Hope that helps some .

[Mavrick]

Had some trouble getting 119 myself on a vsmax..Kept telling me it was 110 or no sat .no matter what switch i used.
I had to bump up the tp in order to see 119.
move up from 12239 .

Hope that helps some .

The first active continuous TP on 119 is now 12297.

[TurboPirate]

Thanks guys, wulfan is right, a friend just told me FTA receivers will not work with DP 33...................................

[WillDekkard]

First off it is the DPP33 switch not the DP33 switch. The Wufman is correct that it will not work with FTA receivers. Now having said that, I have a theory that you could "test" Turbopirate. The DPP33 switch may work on a FTA receiver if you treat it as if it were a DPP44 switch for the receiver settings. Keep in mind that the settings would be the same, save that it does not have a 4th input & output port. Remember you will need the DN receiver to help power the DishProPlus LNB via the DPP33 switch as Mavrick stated.