SV360 and 97west

[TurboPirate]

Hello guys, I aimed one of my dish to 97west, using a CW700, took me a minute, check all tps all good, then in the room where I am using the SV360P the TP that has river broadcasting network 11966 H 22000 3/4 got no quality, went to roof and re check with CW700 and it has 80% quality. What am I doing wrong?
Thanks in advance TURBO.

[Costactc]

Are all your settings the same on both stb? Why don't you try a blind scan on your sv, I've never had a 360 before but I'm sure it must have a blind scan. All other tp present Turbo?

[TurboPirate]

Are all your settings the same on both stb? Why don't you try a blind scan on your sv, I've never had a 360 before but I'm sure it must have a blind scan. All other tp present Turbo?

Yes my good friend, all TP's are present, I re check with lyngsat edited the TP's that had the wrong S/R and deleted all the none working, SV 360P has Blind scan, I'll try that and will report back. ty

[FARJOHN]

Comeing in great here .READ is------------

FREQ 11984 V pid 2023
RATE 21984 A PID 3023
POL H P PID 2023

[TurboPirate]

Comeing in great here .READ is------------

FREQ 11984 V pid 2023
RATE 21984 A PID 3023
POL H P PID 2023

Thanks, tried it no quality.

[FARJOHN]

Thats strange.My Q is over 70% Good vidio and audio .ALL my 22 sats are coming in great .Maybe Saskatchwen has a better reception ,Running the Fortec CLASSIC on a 39in dish and a Invercom LNB with a Moteck GS2100 "/And about 100 feet of RG6

[TurboPirate]

Thats strange.My Q is over 70% Good vidio and audio .ALL my 22 sats are coming in great .Maybe Saskatchwen has a better reception ,Running the Fortec CLASSIC on a 39in dish and a Invercom LNB with a Moteck GS2100 "/And about 100 feet of RG6

I think this is a receiver problem, all other receivers get quality with the 11966 TP, but I'll check connected to the diseq not directly like I did the test on the roof.

[trommy]

Getting 11966h at 56%max on my SV360P.I find this is a weak tp.

[TurboPirate]

OK guys no more roof testing, test in the room did the diseq settings on each STB I tested and all get quality with 11966 TP. CW700, CW650, SV4000, NFusion Solaris, KBox +, Microyal, Pansat 3500, well you get the picture, SV360P wont give me any quality with that TP when all other receivers did, check the RBN channel and it works perfect

[TurboPirate]

Did another try, changed the TP freq from 11966 to 11965 got quality scanned the TP River broadcasting net channel appeared when I went to see the channel it says no signal, recheck again and the 11965 that gave me quality and scanned the channel now it doesn't have quality, I am about to reset the receiver then system clean file, factory file and the resent amz file, why amz file? because I am watching amz sat also. will report later.

[lme]

OK guys no more roof testing, test in the room did the diseq settings on each STB I tested and all get quality with 11966 TP. CW700, CW650, SV4000, NFusion Solaris, KBox +, Microyal, Pansat 3500, well you get the picture, SV360P wont give me any quality with that TP when all other receivers did, check the RBN channel and it works perfect

Same here; kbox will read 55%q, but sv8000 shows 25%q, but picture is good
It looks like the sv brand needs a better s & q meter.

[TurboPirate]

Same here; kbox will read 55%q, but sv8000 shows 25%q, but picture is good
It looks like the sv brand needs a better s & q meter.

Indeed, or it has a glitch, maybe I'll reset it.