PDA

View Full Version : 22K's


Marcella
11-12-2009, 08:16 PM
I am using Chieta 3/4's for 4 sats 119,110,91,82. I just ran out of SW21's Can I sub Ariza 22K's for SW21's on the Chieta 3/4's on sat 91 and 82 to be hooked to Bell HD.recievers. TKS. In advance.
WillDekkard
11-12-2009, 08:40 PM
Nope - Bell receivers do NOT use 22KHz switching, therefore 22KHz switches are not compatible. Must use either SW21 switches or SW44 switches with Bell receivers.
Marcella
11-12-2009, 08:54 PM
Nope - Bell receivers do NOT use 22KHz switching, therefore 22KHz switches are not compatible. Must use either SW21 switches or SW44 switches with Bell receivers.

"Will" if I use SW44 in place of the Chieta 3/4's on sats 91/82 can I then connect ports on these to 2 disqc for fta. giving me 119,110,91,82, on the disqc for NF fta's.Just trying to make do with what I have in stock.

Tks as always
WillDekkard
11-12-2009, 11:27 PM
"Will" if I use SW44 in place of the Chieta 3/4's on sats 91/82 can I then connect ports on these to 2 disqc for fta. giving me 119,110,91,82, on the disqc for NF fta's.Just trying to make do with what I have in stock.

Tks as always

NO - SW44 switches are NOT compatible with nfusion and most other FTA receivers. You will need to use SW21 switches. Place 3x4 or 3x8 multiswitches on each of the 91 & 82 LNBs then you can output them to DiSEqC switches and/or SW21 switches.
The Wufman
11-13-2009, 12:58 AM
I am using Chieta 3/4's for 4 sats 119,110,91,82. I just ran out of SW21's Can I sub Ariza 22K's for SW21's on the Chieta 3/4's on sat 91 and 82 to be hooked to Bell HD.recievers. TKS. In advance.


"Will" if I use SW44 in place of the Chieta 3/4's on sats 91/82 can I then connect ports on these to 2 disqc for fta. giving me 119,110,91,82, on the disqc for NF fta's.Just trying to make do with what I have in stock.

Tks as always

Stay with the 3x4s using SW21s for the subs(91 and 82 combined) and then use good quality diseqcs(recommend Ecoda/EMP-Centauri/or Cheita heavy duty) to combine all 4 sats to the fta receivers..You do not need a SW44 for this setup.
ottid142
11-13-2009, 02:57 AM
You don't tell us how many Bev HD units you want to hook up and how many FTA units you want to hook up. Also are the Bev HD units the dual tuner models?

You can connect 2 of the outputs from each of the 82 and 91 3x4 switches to the SW-44 switch to provide yourself with 4 outputs to Bev units. This will leave you with 2 outputs on each 3x4 switch for FTA use.