hello lnb question

[BRI40]

hello i have quad lnb trying to get galaxy 19 i do ask this question before their told me i have to use port 1 -or -2 now i have port 3 on the quad lnb on the switch fta switch 2x 4 in use my question is what port i have to use the quad lnb is it c-or-l for galaxy 19 my dish is fortec star 31 inches - lnb quad innovacom with a t bracket attach with a lnb 118-anif f-3 on the same dish does it make any diffrence if i would not use port 1or 2 thank you do a reply thank you

[StanW]

Ports 1 and 3 are circular , ports 2 and 4 linear on the invacom.

You will have to use either port 2 or 4.

[Gold]

I never tried using a 2x4 switch. I used a 22KHz switch on mine, but I'm sure it will work.

But like Stan said L is port 2 & 4 & you will want to use one of those for G19

[WillDekkard]

I never tried using a 2x4 switch. I used a 22KHz switch on mine, but I'm sure it will work.

But like Stan said L is port 2 & 4 & you will want to use one of those for G19

It will work fine as I have a 3x4 on each the Circular feeds(ports1&3) and the Linear feeds(ports2&4) from the LNB. Essentially the 2 C ports and the 2 L ports work like 2 separate dual output LNBs.