RTV TP on 83W?

[Yhamha]

Hi guys ; anybody here has an HDnfusion on 83w i need to get the right Tp for the RTV Chan that works on the Nfusion.
i tried to use 10733H4425 but i don't get no chan,i can get these Chan with this same tp on my CWorks800. Thanks

[Gold]

Hi guys ; anybody here has an HDnfusion on 83w i need to get the right Tp for the RTV Chan that works on the Nfusion.
i tried to use 10733H4425 but i don't get no chan,i can get these Chan with this same tp on my CWorks800. Thanks

On the NFHD use 11735 H 4440 QSPK Auto

[Yhamha]

On the NFHD use 11735 H 4440 QSPK Auto

Thanks Bro; it worked:

Can you also give me tp and Sr for Ktel Telemundo at 79w,i use 11904H2170 it worked one time now it doesn't,it shows signal Q but it doesn't pick up the Chan,kinda weird.Thanks in Advance

[Costactc]

I've had issues in the past with Ktel as well, try nudging the dish a bit or tweaking your lnb. Your tp numbers are correct.

[mydish]

"uva uvam vivendo varia fit" and may your fruit ripen always :)

[Costactc]

"uva uvam vivendo varia fit" and may your fruit ripen always :)

Huh!!!!!!!!!!!!!!!!:noidea:

[Yhamha]

I've had issues in the past with Ktel as well, try nudging the dish a bit or tweaking your lnb. Your tp numbers are correct.

Thanks costactc; i can get this Chan with my CWorks on Tp 11904H2160,
but not on HDNFUSION,so i tried SR2170 and it came up last week,now i had to do a factory default and tried this same TP and has Q but no Chan.as i said i'm good on the CWorks.

[Gold]

Thanks costactc; i can get this Chan with my CWorks on Tp 11904H2160,
but not on HDNFUSION,so i tried SR2170 and it came up last week,now i had to do a factory default and tried this same TP and has Q but no Chan.as i said i'm good on the CWorks.

Nfusion HD is a little different, then most receivers. In the mean time try a TP scan with the network "On"...If that doesn't work try it "off"
Let me have a look & see what I can come up with as well

[Yhamha]

Nfusion HD is a little different, then most receivers. In the mean time try a TP scan with the network "On"...If that doesn't work try it "off"
Let me have a look & see what I can come up with as well


Thanks: i finely got it,but i had to do this!
put in TP 11904H2170 than searched The TP with the green butom on the remote, and the chan came up preety tricky,realy not sure if this was what i did made the chan to show,i know the Q was there.

[Gold]

Great!
Like Costactc mentioned that TP is a little iffy.
The trick with the TP search will work on the NFHD...Sometimes you need to search w/network "On" on Linear sats... For DN it's always "off"

What kind of Dish, LNB do you have?

[Yhamha]

Great!
Like Costactc mentioned that TP is a little iffy.
The trick with the TP search will work on the NFHD...Sometimes you need to search w/network "On" on Linear sats... For DN it's always "off"

What kind of Dish, LNB do you have?

36' dish with invacom 030 Quad lnb,and sg9120 motor,no Sw.
i get Sats 60w,63,72,79,83,89,93,95,97,101,103,125w.

[Costactc]

What about 87 and 105w?

[Yhamha]

What about 87 and 105w?

Yes i also get 87w,
I did not search for 105w, what do you get at 105?

[Gold]

Yes i also get 87w,
I did not search for 105w, what do you get at 105?

http://www.internetretailer.com/static/uploads/thumbs/macys_jpg_280x280_crop_q95.jpg

:D