info on switch

[mountaindew]

I have a SMS 4/4 RP20 4 way multiswitch 950-1450mhz.It has 4 outs and on the other end it has one side is sat A in 13v and 18v The other is sat B in 13v and 18v.My question is I have one dish with 2 lnbs on it.110 and 119.I have 110 split with a disq switch and 119 the same.I want to run it to 2 receivers.How do I hook these cables up to the SMS switch

[fearlss-1]

The switch in question uses 22k switching protocol...so you would have to change your settings and use 22k ON and OFF.

Hook up two lines from the 119 lnb to the Sat A input. This would be OFF in the antenna settings.

Hook up two lines from the 110 lnb to the Sat B input.This would be ON in the antenna settings. You can now run 4 receivers from the outputs using these settings.( no more diseqc settings...you use 22k).

All FTA receivers support 22k protocol and you should be good to go.

[WillDekkard]

Sometimes a picture can help - the 2nd one below:
http://www.satfix.net/attachment.php?attachmentid=7779&d=1293950628