HELP !!! Right way to allign a Bell Dish 91 and 82 ?

[slick1mike]

Can some one please advise on the right way to allign a bell dish, ie; do you first set dish to 91 and then skew for 82 or is it the other way around find 82 and then skew for 91. Any help in which is the best or right way would be much appreciated. Thanks

[dishuser]

I just set skew/elevation and then point

[Nostradamus]

either way works man. I usually just set elevation, point at 91 and then skew in 82.. trick is make sure right lnb is picking up the right sat

[rwny1]

either way works man. I usually just set elevation, point at 91 and then skew in 82.. trick is make sure right lnb is picking up the right sat

Hi all
If im in Brooklyn ny 11235
And behind a dish 500
Which lnb is for 91 and which is for 82?
110=82 and 119=91?
Or which ones to the right and which ones to the left if I'm behind the dish

[torpainter]

behind the dish looking out 91 is on the left

[ottid142]

Hi all
If im in Brooklyn ny 11235
And behind a dish 500
Which lnb is for 91 and which is for 82?
110=82 and 119=91?
Or which ones to the right and which ones to the left if I'm behind the dish

About a year or so ago Nimiq 4 was launched to replace the old bird at 82W. When N4 went into service the footprint for coverage was greatly reduced and it now only covers Canada and some area in the US near the border. You may not be able to tune into anything on 82 as a result of this reduced footprint.