SW44 multi dish switch question

[Sizmasta]

What power inserter do I need for this switch?

http://i219.photobucket.com/albums/cc136/Sizmasta/S6301049.jpg

Will this work for it?


http://cgi.ebay.com/Dish-Network-DPP44-Switch-POWER-INSERTER-ONLY-New-DP44-/300537215418?pt=LH_DefaultDomain_0&hash=item45f969f9ba

[Terryl]

One like this. (or its equivalent)


http://www.ioffer.com/i/24v-1-0a-adapter-sw64-sw44-power-inserter-123475909-155844560

And the one you posted is for a DPP44 switch only.

[Terryl]

Also that switch is mounted wrong (look at the arrows) and the power inserter and its interface should be mounted out of the weather, if they get wet the inserter will be toast.


Do you also have the power inserter interface that goes with that switch?

[Sizmasta]

One like this. (or its equivalent)


http://www.ioffer.com/i/24v-1-0a-adapter-sw64-sw44-power-inserter-123475909-155844560

And the one you posted is for a DPP44 switch only.

K thanx bud :)

[Terryl]

Do you have the little interface that goes with that switch?

If not then the power supply is useless...

[Sizmasta]

Do you have the little interface that goes with that switch?

If not then the power supply is useless...

No, I just bought the dish at a garage sale... 10 bucks!

I see what your saying about the interface missing.... Looks like it's cheaper just to buy the whole setup on fleebay.....

found this one


http://cgi.ebay.com/NEW-MULTI-SWITCH-SW44-POWER-INSERTER-ORIGINAL-/260747366120?pt=LH_DefaultDomain_0&hash=item3cb5c10ee8

[Terryl]

Ahhh OK that will work, but one question, do you have legacy LNB's? (14 volt and 18 volt polarity switching)

The SW44 is designed for use with legacy LNB's it wont work too well with the DPP band stacking LNB's.

[Sizmasta]

Ahhh OK that will work, but one question, do you have legacy LNB's? (14 volt and 18 volt polarity switching)

The SW44 is designed for use with legacy LNB's it wont work too well with the DPP band stacking LNB's.

Yup, came with legacy's still attached :)