help adding 61.5

[scooby8888]

i'm trying to get 61.5 sat, now i was trying to use my nano 2 converted to get the signal using dishpro lnb off of a bev dish. i couldn't get any signal at all tried many tps hitting the 91 with no problem, i figured a little down and to the left a bit and it should have come in. now will the nano 2 even pick that up without the highdef board installed and is the lnb ok to use with this sat.
and another thing i have a 4x4 switch running 118/119 and 110 to 3 boxes what would be the easiest way to add the 61.5 up to one receiver.
thanks

[WillDekkard]

Legacy/Standard LNBs:
10367
If you are using DishPro LNBs then a DP34 switch is needed.

[scooby8888]

thanks but i'm trying to add the 61 to the 110 and 119 so 3 lnbs to 3 receivers. could i take the 110 and 61 and put them through a sw21

[hondoharry]

Try TP 12414. That's the only SD TP I can get to come in.

[scooby8888]

ok i'll give it a try
thanks

[WillDekkard]

thanks but i'm trying to add the 61 to the 110 and 119 so 3 lnbs to 3 receivers. could i take the 110 and 61 and put them through a sw21

Yes, you will need a SW21 switch for each of the 3 receivers and a 3x4 placed on the 61 LNB. 1 feed from your 4x4 and the other from the 3x4 to each of those SW21s.

[virgilio]

hi scooby8888, i want add 61.5 to my 110 and 119 satelites to, first you need other dish for 61.5 satelite, and then see what swicth you can hook with the 4x4 swicth that you have, to the 61.5 satelite, i had used 4x1 for 61.5 and i had not be lucky, not work for me, i go keep looking how make all 3 satelites work for my nfhd, let me know how work if you make it, thank

[virgilio]

hi willdekkard, how i will use the sw21, i only have one nfhd and the other receiver are cws and nano2, i will need only one sw21 for nfhd, i run then a cable from 4x4 swicth, and one from 3x4 swicth to sw21 for nfhd, correct me please how i have to do it, thank you very much.

[virgilio]

thank god, i made my nfhd work with 110-119-61.5 sats, i have 3 more cws boxes, i use a 4x4 swicth with a sw21 for 61.5, but in the antena setup i changes legacy s/s, i put there sw21 dish 1 for 110-119 and 61.5 sat i put sw21 dish 2, iam happy, wworking good now, tonigth hd channel star working. thank