whats wrong with this setting

[f2air045]

After installation there is no signal on most satellites except for 91w. It maybe because I cant add more than one signal going to the 22khz side or 0hz side. Any suggestions. See pictures in second (same) post.

[StanW]

After installation there is no signal on most satellites except for 91w. It maybe because I cant add more than one signal going to the 22khz side or 0hz side. Any suggestions. See pictures in other post.
You'll have to describe your setup in more detail - ie lnbs,sats , switches etc :noidea:

[f2air045]

After installation there is no signal on most satellites except for 91w. It maybe because I cant add more than one signal going to the 22khz side or 0hz side. Any suggestions.

[StanW]

See thread "wrong settings"
Why a new thread ? I have merged the two.

[homerdaisy]

After installation there is no signal on most satellites except for 91w. It maybe because I cant add more than one signal going to the 22khz side or 0hz side. Any suggestions.

Holy smokes, I almost went blind looking at your drawing......hehehe. Why not eliminate all those switches and put in one 8x1 switch for all birds for each receiver? Do you have dual o/p LNBs?

Cheers Homer

[sump]

first what dish/lnb's is the 110/119/129

what dish lnbs is the 82/91 ?/

details model #'s

[sump]

IF they are all duals ... this will allow 8 sats and ONE TV antenna ....


http://www.emp-centauri.cz/products.php?id_kateg=6&id_pkateg=34&id=273

[f2air045]

first what dish/lnb's is the 110/119/129

what dish lnbs is the 82/91 ?/

details model #'s
18x24 for 110,119,129 and bell dish for 82,91. All circular lnbs. The dishes are away from eachother

[f2air045]

Holy smokes, I almost went blind looking at your drawing......hehehe. Why not eliminate all those switches and put in one 8x1 switch for all birds for each receiver? Do you have dual o/p LNBs?

Cheers Homer
Will that switch work with vs 9000hd. All dual lnbs