looking to add 129

[scooby8888]

hey guys i wanted 1 tv hooked up to 129.
now i have a 4x4 and a sw21 for the 110 and 119/118 with bev connected with a sw21 switch . is there an easy way just to get the 129 added to one tv.
thanks

[StanW]

hey guys i wanted 1 tv hooked up to 129.
now i have a 4x4 and a sw21 for the 110 and 119/118 with bev connected with a sw21 switch . is there an easy way just to get the 129 added to one tv.
thanks
Connect it to your 4x4 switch or add a diseqc between the sw21 and bev.

[scooby8888]

i can't connect it to my 4x4 because it uses the 2 feeds from the 110 and 119 and could i eliminate the sw 21 with a diseq switch or do i need that and how would i run the cable.
thanks

[StanW]

How many receiver are you using on dn and bev ?

[scooby8888]

i have 4 hooked up to dish and 1 hooked up to the dish and bell thats the one i want the 129 on its the sonicview hd i just want to get the most out of it. the others i don't need hooked up well maybe 1 other to bell but if its too compicated there's no need.

[StanW]

Probably the cheapest way to go about it to add a diseqc switch between your bev lnb and the sw21 . You would connect bev and 129 to diseqc in ports - from diseqc to the bev in port that you are using at the present for bev.

[scooby8888]

so i would not need the sw21

[StanW]

so i would not need the sw21
Doesn't the sw21 combine dn and bev to 1 receiver ? If it does you would have 110, 119/8 , 129 and bev going to 1 receiver .

[WillDekkard]

I am assuming you have Legacy/Standard LNBs? When you say Bev, do you mean 91 or 91&82?

Here is a 5LNB(119/118,110,91,82,129) to upto 4 receiver setup:
http://www.satfix.net/attachment.php?attachmentid=11221&d=1313825704

[scooby8888]

that will work but i only needed 4 sats 110,118/119,129,91 going to one receiver the other 3 receivers only needed the 110,118/119 setup. but i will work with that. thanks alot for all your help.

[Terryl]

110, 118/119, 129 and 91 equals 5 sats, 118 and 119 are two different satellites at the same orbital location. (well .2 degrees apart)

[StanW]

that will work but i only needed 4 sats 110,118/119,129,91 going to one receiver the other 3 receivers only needed the 110,118/119 setup. but i will work with that. thanks alot for all your help.
In that case what I suggested in post 6 will work and is the simplest/cheapest solution .

[Glatt]

Diseqc and SW21 will work for 5 Sats, if you want more add another Diseqc!