sw21 switch

[poppy]

Will a sw21 switch work with a dishpro lnb.:thumbsup::yes::thumbsup:

[StanW]

Yes it will - just keep in mind that dpp lnbs have an internal switch based on diseqc so you would have to specify both in your settings.

[steveOtoo]

It also might be good practice to pass the DPlnb on the 0 khz side of the switch. Not all 22 khz will pass the disec commands on the 22 khz side...........

[StanW]

A sw21 and 22khz are 2 different switches - both work with dpp

[steveOtoo]

My bad............you are correct.

[dingdongdaddy]

Will a sw21 switch work with a dishpro lnb.:thumbsup::yes::thumbsup:
old yes works great ,,Get you a SW21 switch and put one wire from dish 119 &110 on sw21 on 1 side and put one wire from other dish 91 to the sw21 side 2 put your setting like i have them below it should work,ddd

Satellite: EchoStar 7
LNB Power: On
LNB Type: OCS-DP
LNB Frequency: 11250
Transponder: 12239
22Khz: Off
DiSEqC:Port 1
Motor: Disable
Legacy Switch: SW21 LNB1

Satellite: EchoStar 6,8
LNB Power: On
LNB Type: OCS-DP
LNB Frequency: 11250
Transponder: 12224
22Khz: Off
DiSEqC: Port 2
Motor: Disable
Legacy Switch: SW21 LNB1

Satellite: *** 91
LNBPower: On
LNB Type: OCS-DP
LNB Frequency: 11250
Transponder: 12224
22Khs: Off
DiSEqC: Off
Motor: Disable
Legacy Switch: SW21 LNB2

[dishuser]

A sw21 and 22khz are 2 different switches - both work with dpp

they never said dpp
an sw21 wil not work with dp
sw's are legacy
need a dp21

[WillDekkard]

they never said dpp
an sw21 wil not work with dp
sw's are legacy
need a dp21

The SW21 switch will work with DP LNBs providing the receiver has Legacy switch settings as well as DishPro settings.
The DP21 switch on the other hand will not work with FTA receivers, only DN receivers.