ISSUES WITH DPPlus LNB

[abby]

Im having issues with this new lnb using a nfustion phoniex what are the correct setting for 119 and 110?

also when i set it up i got singal 110 using a dn reciever,then i hooked up a vs and got 89-91 when i changed it to 119 and scewed the dish all that happened was i lost 110 ,119 will not come in....do i need to find 119 first with this lnb the scew to get 110?

[WillDekkard]

Do you have a DPP Twin or the 3eye DPP LNB for a Dish1000.2? If DPP Twin, find 119 sat on the LNB Eye to the east(cover the 110LNB[west eye]) first. Once you have 119 then skew the dish to get 110.

There is the possibility that your phoenix does not have enough power for a DPP LNB? That may be the case if the phoenix is the only receiver connected.

[abby]

ok so im best to connect the solaris to it also,and yes it it has 2 eyes and 1 input for another dp lnb...picture below

im also told None of the nfusion sd models put out enough power to be able to switch a dpp twin consistently.

[WillDekkard]

ok so im best to connect the solaris to it also,and yes it it has 2 eyes and 1 input for another dp lnb...picture below

im also told None of the nfusion sd models put out enough power to be able to switch a dpp twin consistently.

Not enough power is the consensus. You may have to place a DP34 or DPP44 switch with the power inserter to consistently power that DPP Twin.

[abby]

ok i got 2 nfusions running on it but when i tryed to hook up a singal dp lnb and another dish i cant get it to work im not sure of the anttenea settings.

[WillDekkard]

Which switch did you use? A DP34 or a DPP44? 119 must be on input Port#1 and 110 must be on Port#2 of either switch. Also, remember not to place a FTA receiver on the power inserter. Use output ports 2,3, & 4 of the switch for FTA receivers. Your settings for the "new" DP dual LNB will depend upon which port you have it connected to - Port#3 or Port#4.