Dish and BEV Setup

[bardman]

I have a dish 1000.2 dish with the Integrated Adapter Bracket
DP44 switch with 110, 119, and 129 connected to 3 receivers
2 svhd8000 both upgraded to latest svlan bin from an ihub and newlink
1 nfusion hd

Location is in southern Cali.

I have an 18 inch dish (originally had directv) with 1 twin? LNB and an extra dual lnb

How do I setup my connection to add BEV 91 and 82 satellites?

Thanks

[satchick]

You could add one or the other by using a single Dishpro LNB connected to the fourth input of the DP44. 82 might be hard to pick up in SoCal anyways.... I don't think a Dishpro LNB will fit that DirecTV dish without modification though, might be easier to find a Dish 300 or Dish 500.

[torpainter]

no chance of getting 82 where you are now since the new sat was positioned in orbit

[WillDekkard]

As others have stated, you will NOT receive 82.0W(Nimiq4) in S.California. Below is a pic of a suggested setup. Remember not to place any of your FTA receivers on Rx Port#1/Power inserter, use Ports 2,3, & 4 of the DPP44 for your FTA receivers.
http://www.satfix.net/attachment.php?attachmentid=11521&d=1317188556
Note*Please disregard the second feed from the Twin to the SW21(which is NOT necessary). Also please note that your Twin must be DPP or DP. Satchick is correct that you would need to modify the DTV dish or the DP LNB(single/dual output) to fit one another.

[timster]

add 91w to port 4 of the DPP44. that's it