PDA

View Full Version : How to connect 4 receivers simultaneously to 110/119/82/91 all having dual lnb's.


murphy1969
10-03-2011, 04:15 PM
How to connect 4 receivers simultaneously to 110/119/82/91 all having dual lnb's. Any help will be appreciated.
Tlarson
10-03-2011, 04:27 PM
Might want to ask this in the "switches" section.
satchick
10-03-2011, 04:31 PM
You'll need to use two 4x4 switches; one for 110/119 and the other for 82/91. The outputs of those two switches will then be connected to SW21 or Diseqc switches....
murphy1969
10-03-2011, 04:47 PM
thank you.
homer_™
10-03-2011, 04:50 PM
You could use a 9X4 powered emp switch. It would work quite nicely unless you wanted to add a fifth lnb or a fifth receiver.

Check out post 2 of this linked thread regaurding a 13 by 8 powered emp switch. Thats a switch with a 6lnb and 8 receiver capacity.
http://www.satfix.net/showthread.php?70890-EMP-Centauri-13x8-Multi-Switch-%28S.160-CP-8%29
Green Thumb
10-04-2011, 12:11 AM
You could use a 9X4 powered emp switch. It would work quite nicely unless you wanted to add a fifth lnb or a fifth receiver.

Check out post 2 of this linked thread regaurding a 13 by 8 powered emp switch. Thats a switch with a 6lnb and 8 receiver capacity.
http://www.satfix.net/showthread.php?70890-EMP-Centauri-13x8-Multi-Switch-%28S.160-CP-8%29
Can not agree more!!! The EMP Centauri switches work flawless and are not that expensive.
kenkell1
10-04-2011, 12:17 AM
You could use a 9X4 powered emp switch. It would work quite nicely unless you wanted to add a fifth lnb or a fifth receiver.

Check out post 2 of this linked thread regaurding a 13 by 8 powered emp switch. Thats a switch with a 6lnb and 8 receiver capacity.
http://www.satfix.net/showthread.php?70890-EMP-Centauri-13x8-Multi-Switch-%28S.160-CP-8%29

EMP Centauri 9X4's powered switch's or the 13X8's are by far the best and cleanest to use. The only ones I use.