changing mounts

[cozumel111]

hi guys, hope somebody can chime in on this one. i had a 0 foot mesh dish that got blown away from a hurrican here. still have the large metal mount,and new motor. noe i have a 6 foot fiberglass dish,with a off-set mount for the lnb. has anyone mounted one of these on and old mesh frame ? any help would be great. :thumbsup:

[Glatt]

It is probably easier to install a 1 meter dish!

[Gold]

hi guys, hope somebody can chime in on this one. i had a 0 foot mesh dish that got blown away from a hurrican here. still have the large metal mount,and new motor. noe i have a 6 foot fiberglass dish,with a off-set mount for the lnb. has anyone mounted one of these on and old mesh frame ? any help would be great. :thumbsup:

Can you post some pix?

[Terryl]

Didn't the 6 footer come with a pole mount?

If it did then all you need to do is remove the old mount for the 10 footer and use the pole, if the pole is too large you can get adapters or have someone weld on a collar that will adapt to the larger pole.

As Augoldfinger mentioned, photos would be a great help to us, then we can help you faster.

[cozumel111]

thanks guys, will get photos,and post them later today. i know i will have to redo the old mount to fit the 6 foot dish.been testing for 20 years, fun.