DPP 33 Switch with two SV receivers

[BobTar]

I have DPP33 switch , can i use this switch with 1000.2 lnb to connect 1 SV360Premier & 1 SV360Elite .

I was try run both receivers directly on 1000.2 but only one can work properly the second one is hang in boot mode , when i disconnct coax from second receiver the boot mode disapere .

I am wondering if this switch will work with this setup or not

[stman]

There is a DP34 and the DP44/DPP44. It's the 44 you need with the power insertor.

[BobTar]

There is a DP34 and the DP44/DPP44. It's the 44 you need with the power insertor.

Well I am aware of that , but this not answer my question.

I guess i need tested my self to be sure if is possible to use that switch (DPP33)

[KIDWCKED]

Well I am aware of that , but this not answer my question.

I guess i need tested my self to be sure if is possible to use that switch (DPP33)

Your question was anwsered.The dp33 is not compatable with 1000.2 setup..

[BobTar]

Your question was anwsered.The dp33 is not compatable with 1000.2 setup..

Thanks......:thumbsup:

[dvick26]

Your question was anwsered.The dp33 is not compatable with 1000.2 setup..i am not sure if the dpp 33 switch will work or not.but why would you want to use it?the 1000.2 has 3 outputs and up to 4 lnb's.the dpp33 has 3 outputs,but only room for 3 lnb's.

[KIDWCKED]

i am not sure if the dpp 33 switch will work or not.but why would you want to use it?the 1000.2 has 3 outputs and up to 4 lnb's.the dpp33 has 3 outputs,but only room for 3 lnb's.

As mentioned the dp33 will not work with the 1000.2 setup.The dpp44 is power inserted and thats what the o/p probably needs..

[Terryl]

You don't need the switch, use the SV 360 Elite on port #1 of the 1000,2 LNB, this will correctly power the LNB, use the 2 other ports on the LNB to run the other receiver.

Make sure you have the correct LNB settings in your receivers, (OCS-DP or dish) and the 1000.2 has an internal switch, so the receivers have to follow the internal settings, Diseqc port 1 = 119, port #2 = 110, port #3 = 129, port #4 is open..

The SV 360 Elite is one of the very few FTA recivers that will run the D1000.2 LNB without a power inserter or external powered switch, it can also use the DPP seperator for dual input.

[stman]

You get so used to dealing with the weak FTA power outputs that it slipped by me that this was an SV360. They do have similar power output to current Dish receivers. :0

[WillDekkard]

What Terryl said.

However, if you would like to "Test", I have a theory. I am thinking if you use the DPP44 settings in your receivers with a DPP33 switch, it may work? If you do try this, please report back your findings, Thanks.