hi costa ctc i need to ask a question

[BRI40]

costa i have a 6 foot dish my lnb is geosat c/ku pro can you please tell me where did the dialectric plate go and the screw i dont know if the dialectric plate fit inside the lnb am confused about this one did you have nay picture where did the dialectric place go and the screw i put it inside the lnb it did loose i must missing something in my lnb a guy was working on it cannot do it hope you can give me some id how to get it straight from what i read on line if i dont put the dialectric plate the quality will not work with the signal hope you give me some answer thank you

[Costactc]

Take the cap off of your lnbf and you'll see 2 lines on the interior part of it. Slide the plate in there. The screw is for tightening and securing your lnbf on the bracket holder. When your skewing your lnbf to reach maximum signal quality, you tighten the screw when that has been achieved- screw fits in the side of the scalar ring.

[BRI40]

hi costa thank you for your reply one question i need to know when i put the plate inside the lnb its very loose i see the two line do you think the lnb missing something a guy was woking on it it could not doing it hes a tech let me ask you that do you think without the plate fit inside the quality wont work just ask that has to be something is missing on the lnb because whend i place the plate inside the lnb its very loose can you let me know what i can do thank you

[Costactc]

It shouldn't be loose at all, it should fit in tight. Just curious as to why you want circular polarity, maybe a sat on the Atlantic side? Even though I'm using a linear lnbf, I can still scan in most circular tp during a scan or manually.

[BRI40]

hi costa i got it inserted inside but it has a black tape am affraid to remove the tape now i need help to align the dish i cannnot the get any signal working at all first the arm come from the polar mount keep broken the tech who was in me house broken 3 polar mount the last none i was using broke also it is my first time am putting hours out see what i can do rhe dish is a 6 feet prime focus lnb geosat c/ku dual output with swicth whend am try to align the dish it come back in the same place want to know is there anything need to attach between the arm from the polar mount to the arc this one i have to do it wife just pay the tech 300 dollars thech hes not coming back i wanna see what i can do thank you .wating for a reply thanks costa

[Costactc]

First of all, remove the plate from the lnbf, it's linear sats you need to aim for. I don't quite understand what you mean by your arm to the polar mount. If your dish is prime focus then your arms do not connect to the polar mount but the dish. You need to find your true south sat and find a tp on lyngsat. You should start by skewing your lnbf to see if you can get signal quality. Once you do get some signal quality you may have to nudge your dish or even play around with the elevation.