what is a universal Linear LNBF settings !!!?

[starmike]

hello i just changed my esx 521 to a universal .01 db
which i had set to 10750... lnb ...but what lnb settings to use on this lnb??

thankyou

[Bigpineguy Retired]

Moved to the proper forum to get you better and faster help...


BPG~

[stman]

hello i just changed my esx 521 to a universal .01 db which i had set to 10750... lnb ...but what lnb settings to use on this lnb?? thankyou Universal lnbs have a Ku low band and Ku high band and uses 22Khz to switch between the two. You will see 22Khz switch settings grey out in your settings menu. Not an issue for you since you have no switches. You will change the 10750 to a low and high 09750-10600. These lnbs are used in Europe where they have frequencies in the lower Ku ranges.

[starmike]

could i put it on universal 1 or 2... ??
or 10600

[StanW]

could i put it on universal 1 or 2... ??
or 10600Which receiver is this connected to ?

[stman]

Try using Universal 1 with your CW.

[starmike]

i have a cnx duo , i tried 10750,9750 and 10600 i got some french sat , only french chnl pointed at the same direction and position of 30w ...universal 2 works most of the time