Sony Movie Channel on AMC 10?

[straffer44]

Cleaned some brush away from my dish and now get amc10 at 135w. The openbox s10 only scans in HSN, bloomberg and one other channel.
A while back i read that the sony movie channel was in the clear at 3999V29079. Sathint shows it at 3995V21667.
Can anyone confirm that it is up
Funny i cannot get any V tps on the openbox:bawl:

[Costactc]

My arc only gets me to 127w, wish I could confirm- I'm sure another member will chime in.

[satchick]

Funny i cannot get any V tps on the openbox
What kind of LNB do you have out on the dish? If it's an older LNB/feedhorn assembly, there's a little servo motor that's used to change polarity. 99% of FTA receivers can't control a polarity servo, so you'll need to use an old analog receiver or a 4DTV to flip polarity. You can also replace the old LNB with a modern LNBF that uses voltage from the receiver, the same way the Ku band LNBF's work.

[straffer44]

The lnb is C-Band Twin LNBF - BSC422. I can get ver tps on others sats. The Nickelodeon hd on galaxy 13 at 127w is working Galaxy 13 127 W (3800 V 27690).
I wonder if trees are in the way or if the skew has to be adjusted