dennis1390
02-19-2012, 08:35 PM
13258
So with this setup with 1 multi switch for BEV (91 and 82) and 1 multi switch for DN (119 and 110) and then Bev and DN connected
to a sw21 switch to each receiver.
What ports do I set in the installation setup ? Do I have to set the ports for the multi switch and the sw21 switch on each of receiver ? Or just the 2 ports
on the sw21 switch ? For example; do I set 91 and 82 (BEV) on the sw21 switch to port 1 and 119 and 110 (DN) to port 2 for example ?
Need a abit clarification on the port setup for this diagram that D-troit drew up for me.
Thanks
So with this setup with 1 multi switch for BEV (91 and 82) and 1 multi switch for DN (119 and 110) and then Bev and DN connected
to a sw21 switch to each receiver.
What ports do I set in the installation setup ? Do I have to set the ports for the multi switch and the sw21 switch on each of receiver ? Or just the 2 ports
on the sw21 switch ? For example; do I set 91 and 82 (BEV) on the sw21 switch to port 1 and 119 and 110 (DN) to port 2 for example ?
Need a abit clarification on the port setup for this diagram that D-troit drew up for me.
Thanks