NEW Style DISH NETWORK DPP 500+ LNB 118.7 118 500 Plus LNBF PRO PLUS

[krab]

The DISH Pro Plus (DPP) 500+ LNBF is a new LNBF for use in Western Arc (WA) installations that include core and international programming. The DPP 500+ LNBF uses DISH Pro Plus technology to simplify installations. Like the current DP 500+ LNBF, the DPP 500+ receives signal from the 110°, 118.7°, 119° and 129° orbital locations with the additional bracket and LNBF. The improvement to the new DPP 500+ over the DP 500+ is the integrated switch.

The DPP 500+ supports up to 3 dual tuner receivers with no external switch required.

Since no switch is required, how do we configure the PORT for the SATs on the STB ?


Thanks

[nixon_r]

It would be the same as the existing DP and DPP LNBs, use diseqc assignments for the ports.

[krab]

For this type of LNB, what are Diseqc Ports assignments on the LNBF for each SATs ?

Any picture of the Ports on this type of LNBF. I know it has internal 3 Sats, 1 Input (eg 129W) and 3 outputs.

[Bud_Alcor]

119portA
110portB
118PortC

[krab]

This is something I found at another site .....



with this new dish and lnbs.with viewsat ultra.the set up is
Satellite: EchoStar 8,10 or (110 W)
LNB Power.............. ON
LNB Type............... OSC-Dp
LNB Freq................ 11250
22KHz.................... OFF
TP Freq.................. 12224
Search Option.......... ALL
DiESqC 1.0............... Port 2
Motor...................... OFF
Legacy SW............... None, unless you are using some type of switch

Satellite: EchoStar 7, or (119 W) to port 1 on the diseqc
LNB Power.............. ON
LNB Type............... OSC-Dp
LNB Freq................ 11250
22KHz.................... OFF
TP Freq.................. 12239
Search Option.......... ALL
DiESqC 1.0............... Port 1
Motor...................... OFF
Legacy SW............... None, unless you are using some type of swit

Satellite: enik 3 or Check your sat list for 118.7 and to port 3 on the diseqc switch.

LNB Power.............. ON
LNB Type............... OSC-DP
LNB Freq................ 10750
22KHz.................... OFF
TP Freq.................. 11715
Search Option.......... ALL
DiESqC 1.0............... Port 3
Motor...................... OFF
Legacy SW............... None, unless you are using some type of switch

[nixon_r]

Just as we thought 119 port 1, 110 port 2, 118 port 3

[lorelys]

and 129sat if some one want to put i guess port 4?

[nixon_r]

The DPP500+ only get 110, 118, 119, you can add a LNB for 129 and make it a DPP1000+ and 129 should use port 4.