Does NFPS work on a SATZEN

I have a Satzen Z500 is there any hope for this FTA??? I there anything I can do to get this unit going on NFPS????
Thanks

Quote:

---

Originally Posted by mrtag

I have a Satzen Z500 is there any hope for this FTA??? I there anything I can do to get this unit going on NFPS????
Thanks

---

C/P.

Yes the z500 has the ability to go private.

Do this for setting up the Satzen for P..

With your remote click these.....Menu>Network>Net Application


1-Once your into Net Application at top of screen use remote and right arrow and move it to Dream.
2-Scroll down to Server No. and set it to whichever server number you desire.
3-Go down to SoftCam and set it to NewCamd.
4-Next go down to Server and enter the server name or IP address.(With remote click on OK to bring up keypad....to switch back and forth from capital letters to lower case letters press red audio button on remote) When done press exit button and you will see on keypad that OK is highlighted...press it and exit out.
5-Scroll down to port and enter port numbers and press ok and exit out.
6-AU is off.
7-Go to Authorization and click OK.
8-Enter User ID, exit and click OK.
9-Enter Password, exit and click OK.
10-Enter DES Key, exit and click OK.
11-Exit out of menu and put it on a working channel (200 for example) and wait for it to kick in.

Quote:

---

Originally Posted by henric

C/P.

Yes the z500 has the ability to go private.

Do this for setting up the Satzen for P..

With your remote click these.....Menu>Network>Net Application


1-Once your into Net Application at top of screen use remote and right arrow and move it to Dream.
2-Scroll down to Server No. and set it to whichever server number you desire.
3-Go down to SoftCam and set it to NewCamd.
4-Next go down to Server and enter the server name or IP address.(With remote click on OK to bring up keypad....to switch back and forth from capital letters to lower case letters press red audio button on remote) When done press exit button and you will see on keypad that OK is highlighted...press it and exit out.
5-Scroll down to port and enter port numbers and press ok and exit out.
6-AU is off.
7-Go to Authorization and click OK.
8-Enter User ID, exit and click OK.
9-Enter Password, exit and click OK.
10-Enter DES Key, exit and click OK.
11-Exit out of menu and put it on a working channel (200 for example) and wait for it to kick in.

---

Thanks for the reply
whats the file is it 2.01 and 2.10 you have to put thru USB?
thanks

Quote:

---

Originally Posted by mrtag

Thanks for the reply
whats the file is it 2.01 and 2.10 you have to put thru USB?
thanks

---

Use the 2.10 -

The Satzen 300 and 500 are perfect for this hobby.

Quote:

---

Originally Posted by mrtag

I have a Satzen Z500 is there any hope for this FTA??? I there anything I can do to get this unit going on NFPS????
Thanks

---

The Satzen works well with nfps

My satzen z500 works ok except that its volume is too low, I have to turn it to maximum and it is still very low compared to my SV8K. Turning the TV volume too high causes hissing sound. Is this a known issue and correctable ? I added a signal amplifier but only the picture seems improved, the sound does not.

Quote:

---

Originally Posted by mrtag

I have a Satzen Z500 is there any hope for this FTA??? I there anything I can do to get this unit going on NFPS???? Thanks

---

FYI, Satzen Z500 is one of the best (If not the best) SD boxes and very hard to find one!