hi need to nkow if w 1000.2 for 110, 119, 129 and 2 receiver do i need external switches.. thank u
Printable View
hi need to nkow if w 1000.2 for 110, 119, 129 and 2 receiver do i need external switches.. thank u
There's a built in switch.
119 on port 1
110 on port 2
129 on port 3.
Depending on the receivers you're using you may need a dpp power inserter. Check the max. power output rating of your receivers. Should be a label near sat. input connector. I think the dpp lnb's require ove 600mA. If your receivers are less you'll need the power inserter.
Further clarification is that the 3 connector cables coming out of the 1000.2 lnbs are for 3 receivers. Thus if you need 4 receivers or more you need a separate switch. Just setup the ports as described by fn59 above.
thank u guys i got nextfta and cnx convert to ilink , so for the info i got w u guys i be ok w the internal switche built in 1000.2. thank s again...
The lnbs are DP and so they are power hogs. Like Fn59 said if your switching fails it may be because your receivers do not supply enough power for the switching and you may need a power inserter.Quote:
Originally Posted by lopeztiti
why would you need 129?Quote:
Originally Posted by lopeztiti
just more channel ...Quote:
Originally Posted by dishuser
not with those 2 boxesQuote:
Originally Posted by lopeztiti
are u telling me that 1000.2 wont get 3 sat for each box 110 119 and 129 on each box ??? if that is the case i better get a regular dish w 3 lnb dual LNB and 2 switchs then i get 110 119 and 129 on each box.. now are u sure that w 1000.2 i can not get 3 sat on each box ????
129 is hdQuote:
Originally Posted by lopeztiti
you can't get hd with the stb's you mentioned above
ok i got u now thank u...