4 Attachment(s)
How to properly determine a Jynxbox clone
Ok folks these should really help you out. Pictures are added as well....
1) Gift box material thinner.
2) No bag of silicagel.
3) The original top lid of the case is made of steel and is shinier than the clone which is made of iron.
4) The original one has one more lock on the side than the clone.
5) Inside of clone top not completely painted.
6) No protective coating on bottom or top.
7) Green sticker on rear of Jynxbox says "PASS", on clone "QC PASS".
8) Clone on/off switch reversed, mounted higher & farther right.
9) Jynxbox remote comes in Ziplock bag, clone uses tape.
10) Jynxbox remote has made in China stamp on back, clone doesn't.
11) Jynxbox A/V cables are slotted, clones are closed.
12) Clone power cable aprox. 8" longer & thinner, & connecters on switch are different.
13) USB front door on clone breaks when opened.
14) Check differences on boards & tuners.
15) The mainboard of the original one has more components which are for the protection of the box.
16) The clone is not using these components to cut corners on thecost.
17) The original tuner has round corners on the pcb, which make sure that the tuners won't cut the users finger when they are installed.
18) The clone has sharp corners on the pcb.
Since clones are coming from different factories, there might be some small differences.
Some clones do not have the Jynxbox web address on the box, in this instance, the rest of the discrepancies are irrelevant.
