What is the best one these days? acamd used to work, but I am getting the "failed to open serial port anysee" error. TIA
Printable View
What is the best one these days? acamd used to work, but I am getting the "failed to open serial port anysee" error. TIA
I don't do that sort of testing, but after a little searching on the web I don't find that anything has really changed. The anysee message is going to be part of a larger log of the start of the program and I'm guessing that you have an Anysee board for DVB-S2. You might be configuring the program to try for a card that is not the current one in use. You might try reading the log more carefully or post parts of it that are not private info so that folks can spot where the problem is.
Are you sure you are not trying to get 8psk signals on a board that does not support them?
Quote:
Originally Posted by jvvh5897
I'm using a genpix skywalker, with dvbdream. I had this same setup years ago with no problems. It is not a firewall issue, as I allowed DVBdream in priogram control. I was getting a winsock 10013 error, but after I changed my firewall settings, no more problem. Everything is perfect in the cardclient.conf & ACamd_PMT.txt files. The server works fine(north). Maybe my server does not allow newcamd?
19:53:24.890: ACamd v0.6.2.0
19:53:24.896: MD-API Version 03.00 - 1.06
19:53:24.902: systems: registering CA system Cardclient, pri -15, ident 1000
19:53:24.902: structloaders: registering loader cardclient config
19:53:24.902: cardclients: registering cardclient Newcamd
19:53:24.902: cardclients: registering cardclient Newcamd2
19:53:24.902: cardclients: registering cardclient CCcamN
19:53:24.902: cardclients: registering cardclient Radegast
19:53:24.902: cardclients: registering cardclient Camd35
19:53:24.902: structloaders: registering loader smartcard data
19:53:24.902: systems: registering CA system SC-Irdeto, pri -10, ident 1001
19:53:24.902: feature: using feature SMARTCARD
19:53:24.902: registering Irdeto smartcard (id 49726474)
19:53:24.902: systems: registering CA system SC-Seca, pri -10, ident 1002
19:53:24.902: registering Seca smartcard (id 53656361)
19:53:24.902: systems: registering CA system SC-Viaccess, pri -10, ident 1003
19:53:24.902: registering Viaccess smartcard (id 56696173)
19:53:24.902: systems: registering CA system SC-Conax, pri -10, ident 1004
19:53:24.902: registering Conax smartcard (id 436f6e78)
19:53:24.902: systems: registering CA system SC-Cryptoworks, pri -10, ident 1005
19:53:24.902: registering Cryptoworks smartcard (id 4372576f)
19:53:24.902: systems: registering CA system SC-Nagra, pri -10, ident 1006
19:53:24.902: registering Nagra smartcard (id 4e616772)
19:53:24.902: systems: registering CA system SC-NDS, pri -10, ident 1007
19:53:24.902: registering NDS smartcard (id 56694732)
19:53:24.908: Monitor listen on port 52520
19:53:24.948: P:Preferred, CAID 1816 with Provider 00000000
19:53:24.948: B:Betatunnel, CAID:1833 with Provider:00000000 to CAID:1702 with Provider:00000000
19:53:24.949: Engine [MD-API]
19:53:24.949: loading smartcard data from C:\dvbdream\Plugins\pip00\smartcard.conf
19:53:24.949: loaded 5 smartcard data from C:\dvbdream\Plugins\pip00\smartcard.conf
19:53:24.951: loading cardclient config from C:\dvbdream\Plugins\pip00\cardclient.conf
19:53:24.951: now using protocol version 525 (cdLen=8)
19:53:24.951: hostname=xxxxxxxx port=xxxxx emm=0 emmCaids 1816/ffff
19:53:24.951: Newcamd: username=xxxx password=xxxxkey=0102030405060708091011121314 providers=none
19:53:24.951: client 'Newcamd' ready
19:53:24.951: ** registered systems:
19:53:24.951: ** SC-NDS (pri -10)
19:53:24.951: ** SC-Nagra (pri -10)
19:53:24.951: ** SC-Cryptoworks (pri -10)
19:53:24.951: ** SC-Conax (pri -10)
19:53:24.951: ** SC-Viaccess (pri -10)
19:53:24.951: ** SC-Seca (pri -10)
19:53:24.951: ** SC-Irdeto (pri -10)
19:53:24.951: ** Cardclient (pri -15)
19:53:24.951: ANYSEE0: open serial port
19:53:24.951: Anysee Version: 3145728
19:53:24.953: Anysee Number Of Devices: 0
19:53:24.954: failed to open serial port ANYSEE0
19:53:24.954: ANYSEE1: open serial port
19:53:24.954: Anysee Version: 3145728
19:53:24.956: Anysee Number Of Devices: 0
19:53:24.957: failed to open serial port ANYSEE1
19:53:24.957: ANYSEE2: open serial port
19:53:24.957: Anysee Version: 3145728
19:53:24.959: Anysee Number Of Devices: 0
19:53:24.960: failed to open serial port ANYSEE2
19:53:24.960: ANYSEE3: open serial port
19:53:24.960: Anysee Version: 3145728
19:53:24.961: Anysee Number Of Devices: 0
19:53:24.962: failed to open serial port ANYSEE3
19:53:24.962: no smartcard interface defined!
19:53:24.963:
19:53:24.963: Ch: 32 - HPPV6
19:53:24.963: Programm crc: C12526DA
19:53:26.986:
19:53:26.986: Ch: 32 - CTVHC
19:53:26.986: Programm crc: 18AF4F70
19:53:26.996: PMT: ACamd_PMT.txt, search, not found PMT=0020 (AND SID=046B)
19:53:26.996: B: 1833:00000000 -> 1702:00000000
19:53:26.996: 0x0020 0x046B 0x1815 0x00000000 0x0051 0x00EE 11111110
19:53:27.096: Incomming PackageSize [184]
Using Acamd 6.2 with DvbPlus and Skywalker 1 and working fine. Try opening up the Acamd monitor and click on the active tab and uncheck the CAT and PMT scan functions. Don't know if this will help but worth a try.
Thanks Steve. I found version 522 of DVBPLUS, so I am going to give it a go. thanksQuote:
Originally Posted by steveOtoo
DvbPlus needs a step by step tutorial to set up properly. The sat.ini file is the key to getting DvbPlus to run properly which includes setting up seed transponders for each sat you wish to tune. By tuning in these providers transponders DvbPlus creates a channel.cvs file which eliminates the need to scan in sats. DvbPlus is an unfinished product created by a guy by the name of Sierra. Too bad this never got further development because it was way ahead of its time. This is not an easy setup.
Based on this post it sounds like some time is needed on the set up so Johnny, if you go with that file be prepared to spend some time on it and make sure you back things up prior to getting into it.Quote:
Originally Posted by steveOtoo
I got it working! I had the provider ID wrong. I forgot the north was 1815, not 1816! Stupid me! Thanks Anubis, Steve & jvvh5897 for trying to help!