can i use bell elipital dish t0 get 110w 119 w,if so with 110 first or program 119 first.???? thanks for help.
Printable View
can i use bell elipital dish t0 get 110w 119 w,if so with 110 first or program 119 first.???? thanks for help.
lock in 119 on left lnb and 110 will be on right lnb, then tweak for stronger 110 sacrificing 119 signal a bit . I have a 3 lnb mount on oval 119,110, DTV then 91 attached to DTV,but raised about 3/4". separate dish for 82 so far. 75-80% strength northern hemisphere.
Go to dishpointer.com fill in your location, and which Sats & dish used, it will show you which direction to point etc.
can some 1 please answer my direct ??can i use a 24 in eliptial bell dish with 2 lnbs only to get 119w&110& witch 1 first,??? thanks.
yes you can if you read first post, and are in the right area footprint. Try and see what 119 signal strength you get and go from there.Quote:
Originally Posted by panmanzaa
It's totally doable! I'm receiving 110 and 119 on a 18"dish, i've pointed 119 on the main lnb and i've added 110 using a 2nd lnb tie wrapped to the 1st one. The 2nd lnb is to the left of the 119 lnb facing the dish. It's also a bit lower.
I think you mean a 22" dish...lolQuote:
Originally Posted by panmanzaa
and think about it for pointing
skew and elevation is obviously different and of course latitude
yea i got a 18 in eliptial bell dish, with 2 lnbs ive been trying to get 119w&110w ,i tryed to get 119w first to no avail,maybe i have to try
to get 110w first& skeew in 119w ????if anyone knows for sure please let me know,--i got a sat finder,please help.THANKS.
Re-read post #3 (dishpointer.com)
it would be better if you described your systemQuote:
Originally Posted by panmanzaa
what receiver are you using ?
what type of lnb ?
any switches ?