Printable View
I have a Dreamlink T5 stuck on boot. It flashes Hi then stays on boot. I tried the Dreamlink bootloop upgrade file no luck. Tried loading file 106 with null cable it loads but it does the same thing flash Hi then it gets stuck on boot.
Any other ideas??
Thanks
Alfred67
try taking the HD module out and see if it will boot properly without it. If it does then treat it like a brand new rec.
also if you have a spare power adapter, (plugs in wall) try it ?
If it boots up fine without the module, make sure you sit the module correctly. Bootloop happens when you sit the module the wrong way.
I tried taking the HD module out no luck, HI flashed and stuck on boot
Try a different Power Supply/Adapter, if it was the original that came with the T5 they are Prone to Fail
One of the Known problems with the DL's
no luck tried different Power Supply/Adapter, same result Stuck on boot
OK, Take the HD Module out, disconnect ALL CABLES, and Reload/Flash with Boot Loop file using null cable & loader program
You "MAY" need to do it more than once, also reading from other forums some have had success pulling the power as the
T5 BOOTS up, to access the menu etc. If you get T5 to function (no boot-loop) I would load factory file followed by latest bin
doing a Hard shut down (back switch) between each load.
No luck , I think its doneQuote:
Originally Posted by auggie
I still think it's the power supply, do you have another power supply that's 12volt 3.5-5 amps rated to try
loading a factory file to the Box ? I would keep trying to make it Go, You may get Lucky & revive it
use a Null modem cable & Loader software for it.
I finally got it, I just keep trying and it finally worked
Thanks for all the help
Post what you did to resolve the problem, it may help someone else out.Quote:
Originally Posted by alfred67