Printable View
Well my mother was loosing a lot of channels she watched so I started with sat91 got nothing for channels
I've done some reading and i think i did it right for 91
I tried editing transponders but it wouldn't let me so I added transponders to list with these changes
for sat92
Transponders 12224 to 12676 vertical or horizontal as shown
symbol21500
FEC 3/4a and turbo 8psk
Dose this appear right
ad for 82 what should the settings be
Thank you everyone for your time
For Sat91 you are correct except for TP's 15&16 Fec=2/3 (for me anyways)
For Sat82 all TP's are symb=21500 Fec=3/4a Turbo 8psk except for TP # 16 symbol=20000 Fec=Auto qpsk (for my setup)
My friend says that for him, 2/3 works on 82. 3/4a does not. And that is with same receiver.Quote:
Originally Posted by auggie
maybe using different softwareQuote:
Originally Posted by Spliceguy
For 82 its all 2/3 for 91 is 3/4a
My SVHD TPs for Nimiq 4 have been on 21500, FEC-2/3 Turbo-8 for ever. But with the moving of channels, many are no longer coming in. I tried changing the FEC to 3/4a but to no luck. Not sure what my next move is. I cannot do a blind scan on the external module.
Many have moved to 91, and more to follow till 82 is Done (end of life)Quote:
Originally Posted by Calmsurfer
I am sorry, I obviously misread. I thought it was 91 which was being removed. Ok, so it's 82. Okay, time to reposition. I haven't had to point a dish for several years. Have to find my meter.
Thank you Auggie.
Just go to dishpointer.com put in your location & it will show you where to point DishQuote:
Originally Posted by Calmsurfer