I have a frigedaire dryer model # FD6646GES0, serial # XD70794796 motor runs but no heat, I check the high limit its good & I could not find the thermal fuse.
Printable View
I have a frigedaire dryer model # FD6646GES0, serial # XD70794796 motor runs but no heat, I check the high limit its good & I could not find the thermal fuse.
No heat and motor running usually means it is only getting 110/120 volts..check Fuse/breaker and finally do a check at the dryer outlet with a volt meter to see if u have 220/240 at that point.Quote:
Originally Posted by russ
dryer is 110 v & its a gas not electric
Most likely the Glo-bar which ignites the gas is bad. The procedure would be to start the dryer and see if the glo-bar turns orange or bright yellow, if the glo-bar comes on but still have no ignition then the glo-bar sensor is either bad or needs to be adjusted closer to the glo-bar to sense the output of the glo-bar which is the switch that will turn on the gas valve. If the glo-bar does not come on then remove and inspect. Be very careful because the glo-bar is easily broken. You can usually see if the glo-bar is bad if you notice an open spot or a chalky spot. There are also coils on the valve that can either become weak or bad. Usually there is an inspection panel on the front of the dryer below the door. Remember to be safe and unplug if handling live parts.
Maybe u are outta gas??Quote:
Originally Posted by russ
Damn now i know why my car won't start..........Quote:
Originally Posted by anyonomus