still down?
Printable View
still down?
you must be doing something wrong.
Still down here also, change input type to ip address , then type in the numbers in Server correct?
Instead of using the domain name use the correct i.p. address for your port. For example if you're using port 10510, use 37.46.112.201Quote:
Originally Posted by joren
791427921
port 15010
got mistake
port 15010=791427921
Are you putting a dot between the numbers like this 79.142.79.21 ?Quote:
Originally Posted by Tralman
Also i think 10510 should be 37.46.112.201Quote:
Originally Posted by Tralman
Port Port SERVER IP SERVER NAME DATE TIME (EST) BY
.
10410 UP 10510 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
10610 UP 10810 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
10910 UP 11010 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
11110 UP 12010 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
12110 UP 12210 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
20010 UP 30010 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
30110 UP 35010 UP 37.46.112.201 1.nfps.ws 11/29/2012 9:36 PM nfps
.
15010 UP 15110 UP 79.142.79.21 2.nfps.ws 11/29/2012 9:36 PM nfps
.
16010 UP 16110 UP 79.142.79.21 2.nfps.ws 11/29/2012 9:36 PM nfps
.
17010 UP 79.142.79.21 2.nfps.ws 11/29/2012 9:36 PM nfps
port 15010=791427921 with dots, still says dns fail
Your entering in the wrong ip check the chart i just posted for the correct ip addy.
What you posted
15010 UP 15110 UP 79.142.79.21 2.nfps.ws 11/29/2012 9:36 PM nfps
Dns fail is an issue on your end.Quote:
Originally Posted by Tralman
Re-enter the info again and reboot all. Start with your modem/router and then the box.
Good luck,
Sp0iler
Still nothing.
solid green light and blinking yellow back of ihub
See post #461.Quote:
Originally Posted by kijiji
I meant 15010 not 105
15010 UP 15110 UP 79.142.79.21 2.nfps.ws 11/29/2012 9:36 PM nfps
did reset network settings, nothing
Changed to ip, 15010 to 79.142.79.21
use dns yes
user name and password supposed to be the same. 14 number code?
Got it had to change dns to no
NFPS 16010 down last night and still down, what is going on, please let us know.
mostly down on 16010 using 79.142.79.21
I have a nano 2, Changed settings to the following below, STILL DOWN, what do I have wrong???
Type : Dream
Server No : 1
SoftCam: NewCam
Input Type: IP address
Server: 37.46.112.201
Port: 10610
AU: On
reset modem/router and box
Down on 16010 northen BC
anybody know about port 10510? thx.
16010 down. I just signed up this morning is it me or everyone have issues with service
I think Nfps, Rocket and much of TuTu are down !!!
16110 still down on my NFusion
even changing IP address no go
so is every one else
testing port 10410 with new ip 1.nfps.bz It is up but with limited ch,s and long freeze,s
where did you read we should use that 1.nfps.bz for anything ...was rocking here with 37.46.112.201 port 10610 until 3:45 pm central today it worked all weekQuote:
Originally Posted by Extintor
It's in the Announcement Sticky !Quote:
Originally Posted by smallyjohnson
http://phoenix.satfix.net/showthread...nly!!!!!/page2
i was asking because of the "bz" the poster put at end instead of"ws" anyhow ......still down with the numerical ip entered
528 not freezing
I think it should be pretty obvious that something new has happened today as many providers are currently having issues and are down or are up with limited channels.
Some are up with glitching and some are up but freezing.
It's a bad time to be trying to figure out what an issue with connections might be.
The Nfps people still advise the ip addy be used for connecting and those I have talked with says it was working before todays issues and is still connecting but glitching at times.
Happy viewing,
Sp0iler
nfps is still saying to use the i.p. addy to connect to the server and its been working fine for me but its not my main server for watching satellite,how ever i did watch it earlier today for about 1 hr with some freezing but not too bad and as of right now its up using the i.p. addy. Cheers:judge::
Having more than one provider come up with the same problem at the same time is fairly common.Quote:
Originally Posted by Sp0iler
When you say its a bad time to figure config problems... I'm guessing you mean its never a good time to mess with settings while the servers down (very good advice)?
It's never a good time to be down!
hi all, I changed my domain from 1.nfps.ws to 37.46.112.201 port 10410 and it is still not connected. Did I miss anything?
on nfps website said that 1 and 2.nfps.ws not working to put ip address
I changed it back to 1.nfps.bz and still not working, is it normal?
Go to nfps annoucements you,ll see a post from Nokia.Quote:
Originally Posted by smallyjohnson
Reporting that 1.nfps.bz is up and running strong at this time,, Most ch,s are back and is almost freeze free.Quote:
Originally Posted by JaneyPhung
changed to 1.nfps.bz, still cannot connect to server on 10510