Nfusion Solaris working without NOI???

Do a default install old dns files do a default then install all the files the 10 steps or files up to 5.04

Quote:

---

Originally Posted by ammo

Okay got the sat list now...did a factory reset....did the info stuff...I checked the internet connection..all info filled in and changed to static....but still get udate system nag......any ideas....Cheers!!!...I am waiting for my linsky router v8 flashed already with ww-drt...but it would be nice if this file is still working to at least get it up and running....I will recheck everything again....on entering server info and put in 0000 I see r3x 1.26 iksprtv team 5.04 crc checked..any other ideas please chime in.....Cheers!

---

hi Do a default install old dn file defualt instal the ten steps

I'm at that stage too, i have the system update notice, but I can't find the 5.04 file...

Anybody help here... thanks...

missin my porn in the bedroom...lol

Quote:

---

Originally Posted by Newfygarge

Unbricking a router is only more fun. By the way did it die right after you sent it the kill bin?

---

YES, E2000 router died right after the Goo bin

The kill bin is used before the goo bin. Sometimes after applying the kill bin u can't get IP's to respond on the router, but u might be able to send a bin using TFTP or TFTP2 to the router, and vola working again.

Quote:

---

Originally Posted by tubbs

YES, E2000 router died right after the Goo bin

---

Quote:

---

Originally Posted by Newfygarge

The kill bin is used before the goo bin. Sometimes after applying the kill bin u can't get IP's to respond on the router, but u might be able to send a bin using TFTP or TFTP2 to the router, and vola working again.

---

Ya, I have been trying to load the factory bin back on the router, but all I get is ttl=100. when I would do the
ping -t command then try to load the bin with Lynksys tftp file.

I even tried to do a "PUT" command.
Both tries would say complete, but it still wont come out of the power light blinking fast. I have tried dozens of times both ways.

It seems as though the goo system, even with the"Goo for Dummies" tutorials, can be very tricky to implement. Granted when it's right it works good(especially for the Nuvenio HD) but getting there can be a interesting ride! I've known, heard of, a few people who have bricked there routers though.

The 504 system seems to work fine for me even though there is only room for two providers. Although the NOI was all there was at one time, Goo and 504 are vast improvements over the NOI and the dedicated computer system.

my two cents

AHHHHHHHHHHHH success at last. I have A Solaris that would not work on anything NOI, goo, extreme bins, nothing. Apperently it was the Nfusion factory U17 bin, which was causing all the grief. This is what I did to get it going.Finally ever since last June I've been trying to get it going.

1.Load the boot_r3x_to g3x_v1.33.bin file in BOOT mode.

2. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.


3. Load this file u48 factory file from July 2009 in MAIN mode.

4. Load this file next... boot file v.130 also in BOOT mode.

5. Lastly load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.

5. Then load newest file which is nfusion-154.2-255.bin, for NOI or goo3./ Or load your favorite Extreme bin. In main mode

Watch your receiver while putting in the bins. After 100% make for sure it says Up da then good. If you don't get that do that step again.
Of course do this at your own risk. It worked for me.

There is the nfusion 69 file that is working without computer or router setup.For sd receivers only.

alsome the bin ikspr5.02 is working 100% up

Quote:

---

Originally Posted by runamok

There is the nfusion 69 file that is working without computer or router setup.For sd receivers only.

---

any idea where I might find this 69 file
I looked in file section but not there
Thanks

i followed all the instructions that was posted to load nfusion solaris listed above did all the ps info sats and everthing still getting update error i dont want to use noi or any router method i just want a stand alone method..can someone please walk me thru this to get it up n running thanks in advance..

why does file 5.02 work with my solaris but not my Phoenix

Quote:

---

Originally Posted by cmangle

Thats what i was referring to, changing your routers function can be a tricky thing. for some its easy as pie, others not so.

As far as 504 you MUST be doing something wrong, it works fine for MANY others. I'll c/p the loading instructions I use. try again, noi CAN be a real pain in the A$$, on top of the fact your computer is involved as well!

Xtreme Instruction for Nfusion SD Only

- If you are already using NOI bin, start with step 5 (start with step 1)

- If you are already using Nfusion 58W bin, start with step 7

1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.

2. Load this file u48 factory file from July 2009 also in BOOT mode.

3. Load this file next... boot file v.130 also in BOOT mode.

4. Load this file 090928 sol phoenix sd v153 1 (Maint. release) in MAIN mode.

5. Load the file named boot_126.bin.in BOOT mode.

6. Load the file named nfusion_factory_U17.bin in BOOT mode.

7. Load the file named XSTV4.14.bin in MAIN mode.

8. Load the file named IKSPRv5.04.bin in MAIN mode.

9. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default

10. Now Menu TO Newcamd Setting > Server Info>OK> 5585 Enter your info “C” button – clear “i” button – cap / small letters / number Menu button - previous menu When doing url leave second one blank Same as password and username and port to leave second one blank. When doing DNS make sure you do 2 number then a space and so on Like this... 01 02 03 04 05 06 07 08 09 10 11 12 13 14 After entering info hit menu couple times.

11.Scan your sats...set time etc.

12. Confirm that switch port assignments for sats are saved. Sometimes it doesn’t get saved.

13. Set a valid channel w/good signal

14.Turn OFF from rear switch and turn ON again <- Very important

15. Wait Couples of second and you’ll get TV By XtremeServiceTv Notes: Normally, power on / off through remote fixes hanging. It might take some seconds before TV shows up after receiver is put off / standby mode. You might need to do channel hopping to get TV. Favorite doesn’t work. Channel lock doesn’t work properly. Only Blind Scan is available for scanning. There’s no option for sat 118W but sat 61.5W is available. There are some minor bugs in the software but it works quite well.

---

Everything work good till after (6. Load the file named nfusion_factory_U17.bin in BOOT mode.)and when O load the - IKSPRv5.02.bin - or the- IKSPRv5.04 .bin - It shows something like (( 900G )_ on the receiver display , and the receiver freezes up ,then when I put the nfusion_factory_U17.bin in again I get back t menu . Am I missing something ?or is there an easier way to get the phoenix to work.

is 5.04 bin still working