Well, that sure straightened it out. Geez. I'd have done that months ago, I finally found some real experts.
On other sites a lot of guys give opinions but have no actual knowledge of how things work. They are guessing.
One guy told me to put Disec in, on a DPP installation.
I said what possible good effect could that have in a DPP installation?
Glad you got it worked out and are viewing as you should.
Using that files transponder list I would think about doing this:
http://www.satfix.net/showthread.php...998#post874998
I made that list a couple of months ago and there have been some minor moves since then.
Good luck and happy viewing,
Sp0iler
Well, I have been looking at this, and there are no channels between 501-525, which are ppv channels. Not in the list. I remember those being there in the scans I did, but there were so many problems with the scan it was, frankly. awful.Quote:
Originally Posted by Sp0iler
Nothing in 573-822 which are mostly intl. Not sure if I can get any of those with the three sats I have on my DPP 1000 3 horn.
Hmm. Any more ideas?
Those are HD channels and you won't get those on your 360.
I also noticed that channel list is all on tuner 1. I had both tuners set up and they seemed to work.
I don't currently have the PVR in use, but if I did I would like to be able to use both tuners.
I know there have been allegations that doesn't work but as I said it all seemed to work.
Well, hell.
I was setting up another SV360Elite for another location.
I just disconnected the original running receiver, put the other one in it's place, same satellite connections, same ihub.
After I finished updating the firmware on the box to the es22 file (it was new, bought years ago by me and never used) it all worked.
After I took it out and put my original box back, I have missing channels. Channels like 239, which I was told to leave the box on to help the guide populate. Not there, doesn't come in, nothing. Many other channels work, but I now have large swaths of missing channels.
So I loaded the channel list sp0iler uploaded, but that didn't fix anything this time. I have it all on sort by SID.
What did I break? This has been running for a few months. Pretty well, I'd say. Not nearly as perfect as the old emu, though.
Try the simple step everyone forgets after loading a file to the receiver Factory Reset then re do all the settings and finally load the channel list file. TurboPirate
Which I totally get, but I just used the ihub to test another IRD.Quote:
Originally Posted by TurboPirate
I didn't expect that simple action would screw up the original one. But it sure did. I didn't load a file to this receiver. I only did that to the new one, which I only tested and have not set up yet.
Well, things are digressing. I reset the box completely then loaded the file 04-es22-2028_NoChk_A4to20.zip.Quote:
Originally Posted by Bruiser
Loaded the channel list Sp0iler provided.
I still have very few working channels. Most say no service.
I realize there might be an NFPS ECM in progress.
I checked and I am connecting properly to the server. But not much working. Maybe nothing at the moment.
I have been turning it off while tuned to 239 which has been populating the guide pretty much completely up til recently
Now I have large swaths of channels with no guide data. Large swaths with too.
This didn't happen before. I wish I could figure out what changed?
Any ideas?
I still have little working on the sv360.
Can anyone suggest what I should look at, or is everything down?
I'm just trying to figure out if it's just me. Or not.