No ppv showing on 110 sat scan

Quote:

---

Originally Posted by DJMark

So since I already have 110 locked, should 119 be there after installing bracket and lnb?

---

yes you should have no problems

Quote:

---

Originally Posted by filippo

yes you should have no problems

---

So I added the bracket. Still get 110 no problem. 119 has 95 signal but no quality.

Quote:

---

Originally Posted by DJMark

So I added the bracket. Still get 110 no problem. 119 has 95 signal but no quality.

---

do you have the correct lnb aimed at 110? When looking out from behind the dish 119 is on the left

Quote:

---

Originally Posted by torpainter

do you have the correct lnb aimed at 110? When looking out from behind the dish 119 is on the left

---

110 is the one on the main arm of dish. 119 is on the right. I'm guessing this is wrong then

Quote:

---

Originally Posted by DJMark

110 is the one on the main arm of dish. 119 is on the right. I'm guessing this is wrong then

---

Yup, If your looking from the rear of the dish, 110 is on the right and 119 is on the left side of 110

What you should do is first take out the bracket and attach the LNB to the arm then look for 110, once you have found 110. Screw it down hard and then attach the bracket with both lnb's and you should have both.

Quote:

---

Originally Posted by ftaforever

What you should do is first take out the bracket and attach the LNB to the arm then look for 110, once you have found 110. Screw it down hard and then attach the bracket with both lnb's and you should have both.

---

That is is what I have now, but 119 is on the right not left.

Quote:

---

Originally Posted by DJMark

That is is what I have now, but 119 is on the right not left.

---

All you need to do is take out the LNB's and move them. Make sure that 110 is the one sitting on the arm and 119 is loose on the bracket. You should do what I have stated. First find 110 with the LNB attached to the arm then everything will fall into place.

Attachment 21747

This is the one I have

Quote:

---

Originally Posted by DJMark

Attachment 21747

This is the one I have

---

Yes the is the right one but you need to find 110 first without that bracket. Once you have found it, attaching that bracket with get you both.

here is a pic

With bracket I have I have to put 119 on the right, that's the only way it will fit on

Quote:

---

Originally Posted by DJMark

With bracket I have I have to put 119 on the right, that's the only way it will fit on

---

You are not installing the LNB's properly then. You should follow what I have told you. Leave the bracket for now and use one LNB and find 110 then attach the bracket, that should work.

Unless I have the wrong bracket. 110 is on the main arm, but the only way the bracket fits is with 119 on the right, when looking from behind dish

Quote:

---

Originally Posted by DJMark

Unless I have the wrong bracket. 110 is on the main arm, but the only way the bracket fits is with 119 on the right, when looking from behind dish

---

Maybe your installing it upside down. I used have that bracket and it worked fine.