I have received one it is simple to set. Up earthnet works newcamd in tools but scanned b** and only get part of the channels. Do not know how to change to 8 psk it loads qpsk?
Printable View
I have received one it is simple to set. Up earthnet works newcamd in tools but scanned b** and only get part of the channels. Do not know how to change to 8 psk it loads qpsk?
You have to edit the transponder info and set to turbo. it will show 8psk on its own.
Do use the numbers on right side of lynsat info
Thanks For the info and the reply.where to enter turbo. Will this work just through hdmi hookup
Just go through each transponder on sat 91 and note the dead ones, or if they have no signal quality toggle it to turbo and see if it locks, it takes a few seconds to lock so give it time to lock, like in seconds.Quote:
Originally Posted by packrat
I am confused as to where to find turbo
on the line where it shows qpsk press right arrowQuote:
Originally Posted by packrat
Thanks dishuser. Much appreciated for the reply and info.
Dont know what I am doing wrong can scan the DV channels available and watch. But when I change transponder numbers and change to 8 psk I get. No signal I am using the unit hooked to tv with hdmi Is this proper?
I changed the transponders to 8psk and most locked to good signal some with qpsk locked with this qpsk only scanned got 504 channels scanned guide lists them but no video I have tv hooked to hdmi should I be running video and audeo cables
TP's 1-thru-19 need to be changed to "Turbo 8psk" symb-21500 Fec-3/4AQuote:
Originally Posted by packrat
Do you have to change transponders as to lyng bev sat or just the turbo and 21500 or leave them as they show up.
Just bring up the TP List on the box/receiver and change 1-19 to what was posted in #26 then
Do a Sat scan for ALL TP's after changes made.
Thanks auggie,dishuser, blackjack for all your help everything good on this end
One thing I want to know on the Junxbox, does it have a True Theme search, because the Jynxbox V2 that I have doesn't ?