Ihub replacments for only $26!

Printable View

Show 40 post(s) from this thread on one page

07-19-2013, 01:20 PM
airjam

Quote:

Originally Posted by Wil

sure did . that's whats got me goin ..hmmmm....voltage is at 5.14 from adapter, that should work, I would think, still waiting on the null modem cable to attach to the stb ....just thought I would try your way. thanx for coming back.....:D lights are coming on but just cant access it thru wiz , i'm miffed. I know I should see a mac addy and version #

Mine are seen instantly. Found connected to my network switch. Is your PC set at static or DHCP

I am using Wiz configuration tool 3.01 Try searching static with 192.168.11.2 That seems to be the default address that they are shipped with.
07-19-2013, 08:17 PM
ChillyWilly

Quote:

Originally Posted by x2006nzl

does anyone know of a good enclosure /plastic box for this chip?
thanks

I would try one of those 2 piece plastic bar soap containers people use when on vacation and packing soap in luggage.....there only about 1 dollar.....just cut cable slots and let the connectors live inside the soap box
07-19-2013, 10:44 PM
GNCSUX

Can anyone recommend where to get a cheap 5v power supply for this item. Someone said they have different sizes in the power supply, just want to make sure i get the right one. Thanks in advance.
07-20-2013, 12:52 AM
airjam

Quote:

Originally Posted by GNCSUX

Can anyone recommend where to get a cheap 5v power supply for this item. Someone said they have different sizes in the power supply, just want to make sure i get the right one. Thanks in advance.

Just google 5v 5.5mm x 2.1mm and you will find.

You can also use a USB to 5.5mm x 2.1mm cable connected to any powersupply that has a USB power outlet sold in dollar+ stores. Some devices like GPS and Cell phones come with chargers that have a USB connector.
Search Flebay for "USB Male to 5.5mm Barrel Connector"
07-20-2013, 04:12 AM
abouttosnap

Powering mine with an adapter I bought about 15 to 20 years ago.
07-20-2013, 04:14 AM
Wil

Quote:

Originally Posted by airjam

Mine are seen instantly. Found connected to my network switch. Is your PC set at static or DHCP

I am using Wiz configuration tool 3.01 Try searching static with 192.168.11.2 That seems to be the default address that they are shipped with.

Thanks guys got it loaded .....:D .my problem was a bad power supply....grrr..now just waiting for my null female to female cable...
Again thanks :yeaah:
07-20-2013, 07:38 PM
GNCSUX

Quote:

Originally Posted by airjam

Just google 5v 5.5mm x 2.1mm and you will find.

You can also use a USB to 5.5mm x 2.1mm cable connected to any powersupply that has a USB power outlet sold in dollar+ stores. Some devices like GPS and Cell phones come with chargers that have a USB connector.
Search Flebay for "USB Male to 5.5mm Barrel Connector"

Thanks for the quick response :)
09-21-2013, 09:49 PM
Manoy

Guys,

I got myself a new wiz110sr too and did everything as posted. Load 4.12 to wiz, load NoCheck to the box, I got the message "Network Adapter Connected", entered my p$ codes, but when I try to check the connection it is giving me a "Connection Fail" message.

Can someone help me please.
09-21-2013, 10:15 PM
airjam

Quote:

Originally Posted by Manoy

Guys,

I got myself a new wiz110sr too and did everything as posted. Load 4.12 to wiz, load NoCheck to the box, I got the message "Network Adapter Connected", entered my p$ codes, but when I try to check the connection it is giving me a "Connection Fail" message.

Can someone help me please.

Wiz110SR is communicating with your receiver OK. Make sure you have internet at the point of connection. 99% sure you entered something wrong in your $P settings. Did you reboot after entering settings ?
09-21-2013, 10:46 PM
Manoy

Quote:

Originally Posted by airjam

Wiz110SR is communicating with your receiver OK. Make sure you have internet at the point of connection. 99% sure you entered something wrong in your $P settings. Did you reboot after entering settings ?

Thanks for the quick reply.

Yes I have rebooted the box and the wiz. I also checked with the router if it is connected and yes wiz is connected. I tied checking the p$ settings they are all right (des key, user password, port server IP.

I am using 2 p$ at the sametime and both of them are "Connect Fail". I have done this with my nano and it works. I am just changing to sonicview because they say it is more stable.
09-21-2013, 10:49 PM
satcom staff

Quote:

Originally Posted by GNCSUX

Can anyone recommend where to get a cheap 5v power supply for this item. Someone said they have different sizes in the power supply, just want to make sure i get the right one. Thanks in advance.

Quote:

Originally Posted by abouttosnap

Powering mine with an adapter I bought about 15 to 20 years ago.

their is no need for you to put an external power supply to WIZ110SR. the 9pin serial port of the sonic already has .5vdc running thru it. you just need to soder a small wire patch to wiz110sr. piece of cake
09-03-2014, 02:34 PM
showhorse

where is the picture on where to appl;y the patch for the sonicview 8000hd thanks
09-03-2014, 03:09 PM
airjam

1 Attachment(s)

Quote:

Originally Posted by showhorse

where is the picture on where to appl;y the patch for the sonicview 8000hd thanks

See attached pic.
09-04-2014, 02:21 AM
rockisdead

I think that I'm buying one since I have one without dongle.worth give it a try.
09-04-2014, 09:59 PM
rockisdead

Shipping fee made me step back,$45USD,WTF.

I could find $70 iHub locally and no hassle to use with SV8K.

Show 40 post(s) from this thread on one page