HD8000 not turning on

Quote:

---

Originally Posted by The Noof

I have several Harmony remotes (650 & 700) that work fine if you can't find an original.Lots of Harmony remotes out there.

---

On your 650, is the SV8000 already supported out of the box? If I were to get a used one do I need anything else to make it work?

Have a look here:

Code:

---

https://support.myharmony.com/en-es/650

---

Quote:

---

Originally Posted by ssj92

On your 650, is the SV8000 already supported out of the box? If I were to get a used one do I need anything else to make it work?

---

I haven't had an SV running for 2 plus years, but as I recall they worked without having to learn from the SV remote:the harmony software worked, including the coloured function buttons.

Quote:

---

Originally Posted by ssj92

Yes it has the cable in the back. Interestingly, I saw quality for a split second multiple times when I was trying to find signal but right now with repaired box with red a-1 board it works fine. With second box green board no quality and strength is very low (10s vs 50s).

It is selected in settings, shows up as Q-board vs A1-board on the red box.

---

Mainboard
2007
v1.1
Built-In Tuner(Z)
External Q Module-Not Detected
External A-1 Module-Detected

Boot loader 02.07
Front software vA-12

Mainboard
2008
v1.3
Built-In Tuner(S)
External Q Module-Not Detected
External A-1 Module-Detected

Boot loader 02.07
Front software vB-07

I'm assuming wording difference in the software due to the two piece module from jump. The Z was a typing error in the software that was corrected later. Again my assumption. Quick read on an old satellite board the two piece module was referred to as a Q-board and sub board. Long module that stretched about the whole width of the inside of the stb.

Attachment 29304

you are right about the long module. that isnt a A-1 board. no need for a A-1 board if not wanting turbo.

correct me if im wrong noof and auggie

The A-1 board was a ADD-ON for HD when Turbo 8-psk was put in place a while back
The green boards that came with the sonicviews were basically for SD & OTA (OVER THE AIR) I Believe ?
But some of the Green ones are HD/Turbo capable cause I have one in my SV8000 that does HD etc. (custom built)

you are correct about sd&ota and i also have the green 8psk board in mine :yes: