Printable View
On my unit under transponder all I have is (1/32) all the way up to (32/32). Am I looking in the wrong place because I dont see what you have listed. Menu/ installation/ Dish Setting. Also Ive been noticing that anytime you turn the reciever off or even go to the menu the reciever defaults to the same channel which it never did that before. Thanks for any help.Quote:
Originally Posted by sat9182
Does anyone know if dreamlink is hd and when do you think the rest of the channels go hd?
dreamlink is HD with the HD Module installedQuote:
Originally Posted by anthonym41
you should search or ask in the jynxbox section ;)Quote:
Originally Posted by redrooster1
would a blind scan not pick up the changes?Quote:
Originally Posted by sat9182
T5 & HD not responding to the transponder changes.Still no signal on the affected transponders.Quote:
Originally Posted by sat9182
No signal on a Dreamlink HD or a VS Max. I tried blind scan and network scan on both.
Sat9182 you definitely have pic on the Jynxbox? I hope that incorrect because might mean bins are needed and that's not happening for the VS for sure and most likely not the DL either.
I have a jynx will test tomorrow...
yes jynx working on all the tp's after change
i been playing with t5 with no successes yet
if you play with symbol rate you can get it good percent s and q but just will not lock and will not scan without a lock
Thanks for the info. I will also dig out VS channel editor see if I can get anywhere. Anyone seen a DL channel editor?
Hope bins are not needed for effected boxes...
Question I have a jynxbox but no remote anyone know where I can order 1?
Sat8292,
Silly question the channels that are working on the Jynx are they SD or have they been updated to HD?
Try asking in the Jynxbox sectionQuote:
Originally Posted by anthonym41
I remember whe the SV8000 hd lived past it's dream life.A group of guys rolled up their sleeves & got it done.Might be the situation here,but the uncertain future of bell iks might defeat the purpose.I think I will start a thread to see if anyone interested.I got my hands dirty on the SV porject, & learned enough to contribute.I have lots of hardware to break.lol.
Noof I scrapped a bunch of boxes a while back but here we are. I have no SV left but I know how to edit their files. I have Jynxbox, DL and VS (Max). Maybe a thread for all box Sat file repair? I don't see a DL channel editor but maybe the channel list can be edit with a text editor or hex-edit.Quote:
Originally Posted by The Noof
he is still at work but I can confirmQuote:
Originally Posted by jets
still sd they did remove a few ones they do already have in hd but the sd ones with no hd equivalent are there running in sd
they changed to mpeg4
I started 1 bro.Thanks.Quote:
Originally Posted by jets
I’ve lost channel 2041 hd which is CTV Ottawa, seems like wenever Bev started playing around with their sd channels, can anyone confirm on their dl t5 ?
2041 is on Sat 91 12282-21500 is gone.
I thought being HD channel itwas on the 82. Guess I gotta wait. ThanksQuote:
Originally Posted by Simon Templar
your going to see 82 get phased out its at end of life and there contract is over for it they extended it for couple years i believe but they are going to be moving all to 91
they are making sd mpeg-4 for a reason to save space and bandwidth make some room to move all the hd over to 91
that's why you will see any stations they have in hd and sd the sd will go away so they don't have duplicate channels
the ones they dont have in hd will stay sd just in mpeg-4 format
Hi, I have CTV20 HD on 1209, and working for DL T5
so how do I know my Jynxbox HD v6 is mpg-4 compatible. Sorry but after all these yrs I dont know whats what. I just pay get it going and do not touch anything. I have both 82 and 91 dishes. is there something I need to do or just be patient and wait for the dust to settle. ThanksQuote:
Originally Posted by sat9182
https://www.satfix.to/showthread.php...94#post1391194Quote:
Originally Posted by redrooster1
I made these changes. I now have a signal but no channels coming in after a scan on those transponders. Am I missing something? Thanks.Quote:
Originally Posted by sat9182
Yea same here, not for long thoughQuote:
Originally Posted by NorthernPike
Figured it out. Once I made the changes the channels came up. The trick here is not to delete the channels or factory your Jynxbox. Just make the changes, never mind the scan and watch the missing channels. To bad the DL wasn't this easy.Quote:
Originally Posted by RonTheRipper
I call BS , bet you scanned them but cant watch them.Quote:
Originally Posted by RonTheRipper
Now why would you say that? Like I said, they wouldnt scan. What I did was I changed the effected transponders to 21.500 and then changed mode to Turbo. Watching Fox news as I type. Quit being an a...ole and try it yourself.Quote:
Originally Posted by surfinisfun
Already confirmed by sat9182 https://www.satfix.to/showthread.php...89#post1391189
Wish this worked on dreamlink as well but so far it sounds like it only works on jynx
make note of that sectionQuote:
Originally Posted by anthonym41
https://www.satfix.to/showthread.php...are-alteration
are there any epg stations on sd or hd, all the ones i new of are gone.
I've tried a bunch on sd but no luck.
Thanks
Depending on the box but native channel number is 225 (1225 DL) for 44 hour guide...
Quote:
Originally Posted by Tim Bits
225 not working as this am
1522 used to give a full guide too...probably the same transponder?Quote:
Originally Posted by jets
1225 44 hour EPG 1522 9 day EPG. I think 1225 is TP12428. On the Viewsat's only way to get an EPG is native 225, 44 hour only.
thanks. ive been at this a long time, frustration doesnt happen anymore. sucks i lost fox news and my local news lol. I tried a blind scan on 91 and 82 nothing changed that i see so far. will drink watchin something else.lolQuote:
Originally Posted by fishmaster
so where do you see mode change to turbo. I dont completely understand how this works.Quote:
Originally Posted by RonTheRipper
[QUOTE=redrooster1;1391339]so where do you see mode change to turbo. I dont completely understand how this works.
i don't have a Jynxbox, but most boxes it's located in the Dish settings list, under transponder # where you bring up
A transponder list 1-32 this is where you can edit the transponder etc.
I'm still using a SV8000 and a Sonicview 360 Premier. Now losing channels.Quote:
Originally Posted by The Noof