No ppv showing on 110 sat scan

Quote:

---

Originally Posted by ftaforever

Maybe your installing it upside down. I used have that bracket and it worked fine.

---

Attachment 21749

Okay, that is a possibility now that you've said that. So the part with the lip will hold 119 lnb, and the open part will go on the arm with 110?

Quote:

---

Originally Posted by DJMark

Attachment 21749

Okay, that is a possibility now that you've said that. So the part with the lip will hold 119 lnb, and the open part will go on the arm with 110?

---

Sorry bro, I cant remember as I haven't used one of those in years but I would assume that you would have to try the other way.

go to ebay they have what you need

Quote:

---

Originally Posted by filippo

go to ebay they have what you need

---

He has what he needs he only needs to know how to use it.

Quote:

---

Originally Posted by ftaforever

He has what he needs he only needs to know how to use it.

---

Lol... I think you're right. I figured out the proper way to mount it. Now if I could only find 119 I would be all set

So I have everything installed properly. Bracket on the right way, locked on to 110 west. 119 lnb has about 75 signal and no quality. Next steps?

If you are sure you have the setting correct for your LNB type... remove switch & run wire direct from 119 to receiver... if problem persists run same wire to 110... if still bad signal than the wire is bad. Use only RG-6 cable. If good signal with same wire then tweak dish or check LNB... put switch back in only after finding no other problem ... simple process of elimination...

Quote:

---

Originally Posted by hutch

If you are sure you have the setting correct for your LNB type... remove switch & run wire direct from 119 to receiver... if problem persists run same wire to 110... if still bad signal than the wire is bad. Use only RG-6 cable. If good signal with same wire then tweak dish or check LNB... put switch back in only after finding no other problem ... simple process of elimination...

---

So, what if I'm using a cable wire that cam with my cable receiver? Are these no the same type of cables?

make sure you're on tp 12297

Quote:

---

Originally Posted by dishuser

make sure you're on tp 12297

---

Good pickup there. Forgot to mention that.

Quote:

---

Originally Posted by dishuser

make sure you're on tp 12297

---

I have been on 12297 the entire time. I think at this point it is an alignment issue, I just can't do it. Very frustrated.

on sat 110 what is youre signal and quality

Quote:

---

Originally Posted by filippo

on sat 110 what is youre signal and quality

---

95 and 95 on 110

on sat 119 what is the lnb freq should be 11250 check youre lnb if it has any cracks and check youre cable if you have done all that and you instaled the bracket you should be watching tv good luck

Quote:

---

Originally Posted by filippo

on sat 119 what is the lnb freq should be 11250 check youre lnb if it has any cracks and check youre cable if you have done all that and you instaled the bracket you should be watching tv good luck

---

lol... that's what everyone keeps saying. I've tried everything. I don't know what else to do.