ya and those are the 1s with the channels I need
Printable View
ya and those are the 1s with the channels I need
Noof do you get ctv ottawa channel 229,fox east channel 283 or channels 274,275,276,277 and 278 as I don't get any of them nor do I get sporstnet east channel 406
On my SV8000 283=YES 274=YES 406=YES 275,276,277,278=No such channel or in GuideQuote:
Originally Posted by anthonym41
Channel CTV O 229 doesn't scan in anymore since changes.
So auggie, CTV O is that CTV Ottawa is it not in HD somewhere?
You guys don't have dual dish so you get both SD and HD. I don't watch SD except when on guide channel and then I mute it LOL.
Point your dish at 82 then or upgrade to dual dish...Quote:
Originally Posted by anthonym41
Mine is a 20" 500 dual 91/82 with Legacy LNB's Channel 229 is CTV-Ottawa doesn't come in for me ?
Missing lots of channels today all scrambled like ctv toronto any answers thanks
If you are using a Dreamlink you are S.O.L. I have shelved Mine awhile ago, Mainly a Door Stop NowQuote:
Originally Posted by beefcake
just a heads up it looks like another bunch of channels just dropped I'm using a jynxbox and lots are gone as of today
Server say connected. but no picture, anyone else?
it's been down for a but sound on 82 channels no pic and no sound or pic on 91
Me Too...Somebody probably tripe over cord
Same problem.
audio is not encrypted on 82Quote:
Originally Posted by anthonym41
should be back to normal now
Thank so mush for working
anyone else missing lots of sports and movie channels on 82 or 91.
help please... well i made a big miistake. I deleted all channels on my jynx box 82-91 sats. Now i did a blind scan thinking this would clean up all the channels i dont recieve anymore. well Im missing channels that i used to have. Does anyone know what am i doing wrong or know how to add the channels. Thanks
You want to do a Sat. scan not Blind Scan, I would hook up direct (no switches etc.) to each Sat
and do a Sat. Scan on each one, you may have to do this Many Times, for the receiver to pick up the missing channels
because it tends to skip over TP's etc. Go through the list of TP's and make sure you have good Quality of signal on them before
you do your Scans.
Has anyone found where TSN 4 AND 5 are located on 91 I only see them on 82 and they don't work
TSN 4 Channel 403 TP=12341 Sat-91 TSN 5 Channel 404 TP=12501 Sat. 91 Both are Working on SV8000HDQuote:
Originally Posted by john deer
Both those TTps scan but still no luck I'll delete them from 82 and scan again
Still no luck for me
Are you hooked up direct to box when you do your Sat Scans, also go through the TP List (if possible) & make sure
you have GOOD Quality of Signal before you do the scans, Those Jynxbox & Junxbox's seem to skip over TP's at times
so you may have to scan "MANY TIMES" to pickup some of the missing channels.
I have tsn 4 on transponder 12370 on 91; tsn 5 transponder 12516 on 91
so i disconnected sats from switch and scanned each TPs 1 at a time on 91 and then did same on 82. before scanning i checked each tp for good signal, still missing some channels like Kitchener news it was 2584 on my jynxbox. What next. do i delete all channels again repeat what i did and make note of the ones that are skipped and if so how do i scan those tp without scanning all 34 tp. Thanks ahead of time.Quote:
Originally Posted by auggie
With all the changes that are Happening & still to come, it's going to be HIT-&-MISS with any box that we use
I'm missing channels as well, but I'm not Dwelling on them etc. I Still have lots to watch at this present time to keep
Me entertained, Who knows what's going to happen down the road, enjoy what we have left for as long as it Lasts.
Is anyone getting any of the Crave (1, 2 or 3) or Hollywood Suite (70's,80's,90's,00's) channels?
https://www.satfix.to/showthread.php...69#post1409469Quote:
Originally Posted by Flipside786
They all come in on my jynxbox. Go to installation then motor type and change to Diseqc1 than go to motor settings and move east. I know the dish doesn't move but when you do manual scan one at a time they will come in. May also have to change the polarity. Make sure your on satellite 91.Quote:
Originally Posted by Flipside786
You are getting the Hollywood Suite channels on 338-341?Quote:
Originally Posted by ftafrank
how come when I scan it skips over transponders. Ive gone in and tried to change the polarity but that didnt do anything. Is there something im doing wrong or thats normal. Thanks
If you are using a Jynxbox (not sure on the junxbox) that is it's NORMAL OPERATION, that's why others have saidQuote:
Originally Posted by redrooster1
You have to do Multi-Scans in "Hopes" of picking up extra channels, I suggest hook up direct (No switches etc.) when doing
your scans, Also depending on the Dish Equipment you are using (legacy or DP or DP+ LNB's ETC.) it "Could Be a Power Issue"
Not enough power from Receiver Box to feed the Equipment being used Maybe.
If you have a junxbox I found it best to use manual scan it will bring up a list of transponders highlight the one you want to scan and press the blue button, then select OK.Quote:
Originally Posted by redrooster1
If it comes back with "Program not Found" message just select OK, then hit the blue button to repeat the process until it finds the channels.
I had to scan some transponders as much as 12 times before it finally found the channels.
No not getting those.
Sorry late reply, thank you!
really 12 times okay well i will put on my patients pants and tackle that on the weekend. LOL.Thanks.