you are expecting a lot...lolQuote:
Originally Posted by sat9182
Printable View
you are expecting a lot...lolQuote:
Originally Posted by sat9182
maybe treat them like they're hill for not reading...lolQuote:
Originally Posted by sat9182
Anyone having any issues on sat9182?
everything looks fine on our end
Anybody else have freezing Issues? Trying to watch the Euro2020 games but it is becoming unwatchable, keeps freezing and if you change channel, works for few seconds, delays channel changes and freezes. Have been using for several years and was working freeze free. Re-positioned dish, deleted all channels, rescan it but no difference. Any suggestion is appreciated.
everything working fine
check your tuner is seated tight
also reboot modem and router
My Tuner is properly plugged and tightened by nut and washer, could it be the port that I'm connected to. Thanks.
is it a provider ird
if so they don't put out a sid and will try and card they like
so they don't work as well as fta box that provides a sid
It is FTA Box, Jynbox Ultra HD. Thanks.
I would remove the 8psk, reconnect sat feed accordingly & try watching SD channels to confirm/eliminate the module as the problem.Quote:
Originally Posted by Borealis
The SD Channels are working fine, it is the HD Channels that are having the Freezing problems. Thanks for your Input.
If you are getting 91 fine and now 82 is freezing, check your signal quality on 82. Possible bad cable, switch, LNB, or need dish realignment.
The possibility of the tuner going bad is there also as suggested
point a fan at moduleQuote:
Originally Posted by Borealis
there may be couple ups and downs today after lunch
there is going to be some maintenance being done around that time
are we down right now sunday
no everything is up and running fineQuote:
Originally Posted by joecool
is north having freezing issues .. it was working this morning then suddenly bad signal no signal or
freezing tiling here in the northeast usa on most channels ..
bad signal no signal is not on our end check your dish and switchesQuote:
Originally Posted by happyfeet8
Quote:
Originally Posted by happyfeet8
What Box are you using, if a DL-T4-5 then try a different Power adapter (plugs into wall plug) if it was the original that came with
your Rec./Box it is Known to "FAIL"
Having issues connecting to the server with Jynxbox V2
Has worked fine for years
Donation good till July/22
I have rebooted everything a few times
disconnected all cords attached to the receiver and rehooked them
have very good quality on both 82/91
Have no channels on either as cannot connect to server
have sound on 82
I get an IP address under network settings
tried several other Ethernet cables
tried inputting credentials in a different server port
still no connections to server
just seeing if anyone has any ideas before factory defaulting and reloading everything
Thanks
send me your username to connect in pm and i can check your login
all is working on our end
No Chinese on our end since yesterday anyone else?
how about nowQuote:
Originally Posted by janez
I think I fixed that issue
not home to check
Back up again, wife is happy Thank you very much
we are having a couple issues
we are working on the situation
you may see a few irregular freezing and glitching for the next 30 min to hour
Is channel 1602 working for anyone like to know I got signal but it's scrambled?
Any help would be great.
1602 Discovery HD up
Sorry Sat9182 my mistake it's 602 W network scramble.
Thank you
Anyone else freezing?
have you rebooted everything?Quote:
Originally Posted by biglar
602 is upQuote:
Originally Posted by bbatur
working fine no freezingQuote:
Originally Posted by biglar
reboot your box and modem/router
Thanks. I had rebooted router, box and computer/NOI. Looks like it was my modem.
Been down since 10 AM. 2 receivers
Tried:
rebooting receiver, router and switch
check ethernet cable with laptop connection ok
checked code status on website, both receivers good till next year
Not sure what else to check.
I would get sat9182 to check your login data at his end to see if it works for him.Quote:
Originally Posted by fn59
P.S...are you using 2 different codes, or 1 code (at one time of coarse) on 2 stbs?
Each receiver has it's own code.
server is running fine i have tried both the codes they work for me
sometimes a simple modem / router reboot will fix issues
have you checked the dish did not mover or lnb crap outQuote:
Originally Posted by fn59
what error you get ?
connection or scrambled ?
just used a port check tool, isp is blocking port 12345
If anyone knows a solution I would appreciate it, in the meantime I'll do some searching online.
try our domain and port in your browser to verify if they blocking out 12345
1.sat9182.xyz:12345
if not blocked you will see random text
use firefox to check if you have