The time for lock is that the Jynx STB has to read data from the stream being downloaded.
Printable View
The time for lock is that the Jynx STB has to read data from the stream being downloaded.
I have MegaTvi SHD 3000 receiver after manually making changes to the new/changed transponders i got
my sd channels working again.
On jynxbox, transponder changes worked and channels come in, however I had deleted a couple channels that are on these and now when doing a scan, it doesn't find channels and says 'skip', so now these missing channels won't come back in. Are they gone forever now or is there a way to get them back. Tried searching this site and the web and can't find solution.
You could try scanning just the TP's those missing channels were on, not sure if they will come back or not but worth a try
Tried that and it starts scanning then ends then says'skip', then no program found. Gets good signal but takes almost 4 secs in Maybe this delay didn't give it time to catch anything.
You need to give it time to find stuff, mine would do the same, (skip a TP) then it would come back to it once locked on ?Quote:
Originally Posted by bizee
If you have a Junxbox from Ali it's missing a few TPs on 91 from the factory and you have to re-add them. Check LyngSat list against your box's list to be sure, but I think it's 12370V/21500/8PSK, 12457H/21500/8PSK, 12282V/21500/8PSK, and 12457V/21500/QPSK. I think 2 or 3 of those have channels on them so they're not just useless.
On Sat 91W, I am not getting signals for TP 12224 to 12414 and 12457, 12472, and 12486. However, getiing signals for TP 12428 to 12676. As per, Bell changes symbol rate for all these channels from 20000 to 21500 and and transmission to "Turbo 8PSK" (using Dreamlink T5). After changing the symbol rate and transmission still no luck. No signals for those TP yet. Does anybody know anything else to resolve this issue?Code:www.lyngsat.com
Yes Dreamlinks are Toast or Basically Door stops, they can't handle the TP changes with-out
Software/Firmware updates, & that isn't about to happen anytime Soon or ever.
I have a dreamlink that has worked flawlessly for many years. I also have Jynxbox Ultra HD v30 that was purchased just as a spare. Plugged it in this morning and it does work also. Is there a way for me to add the info needed in the box to get the missing or changed channels on Nimiq 1. Have not had to make any changes since all has worked for many years Thanks
For the Dreamlink you are S.O.L. They are Door Stops Now, can't handle the changes with-out Software/firmware updatesQuote:
Originally Posted by john deer
and that isn't Going to happen anytime Soon. The Jynxbox can handle the changes, TP's 1-thru-19 need to be changed
That's great news. I have been reading info on the Jynxbox, but still haven't been able to see how to make the TP changes. Where can I find out how to do this. Thanks in advance
did you ever consider reading in the jynxbox section?Quote:
Originally Posted by john deer
I have been reading that section but can't seem to find what I need
Read through this section: https://www.satfix.to/showthread.php...ltra-HD-V2-fecQuote:
Originally Posted by john deer
Aggie thanks for the help I will start reading there. I have downloaded the new info from Lyngsat now just have to find out how to get in the box
Lyngsat is not always up to date, so be advised
Thanks for your help and Information Got changes made and now using the Jynxbox. Too bad I really liked my dreamlink. What other boxes should I be looking for to have as a spare ?
The current working Boxes that I know of are Jynxbox, Junxbox, SV8000HD could be a few more, but not sure.Quote:
Originally Posted by john deer
Will these Jynx boxes pick up the missing channels such as Fox news if they are new or factory defaulted units??
My jynx box does get Fox News after I did a factory default. But there might be some channels still missing..(porn)Quote:
Originally Posted by RonTheRipper
So on my Jynxbox my fox 2507 is freezing tonight but cnn 2500 is not, just wondering if others having this problem. Put energy into fox not cnn. save this world. lol
What your not pointed at 82, why not watch it on 3578 b3ll channel 1578?Quote:
Originally Posted by redrooster1
To save the world, you have to destroy them both.Quote:
Originally Posted by redrooster1
Hi i don't understand why we can't get FOX NEWS we get like 10 channels carring CNN but no fox is this site controlled buy CNN ????????
this site?Quote:
Originally Posted by beefcake
are you drunk?
0507 Fox News Channel Card OK its still there
507 not coming in for last 2 days on my 2 jynxboxes or my 2 Sonicviews 8k, and both had to tp settings changed a long time ago. All other channels on tp12268 and all other SD channels seem fine. Not sure what else I can do.
Yup same thing here. 507 not workingQuote:
Originally Posted by bizee
Bev has a long standing and well known debate internally if it wants to support Fox news.
Look it up yourselves.......maybe they made a decision.
I have 507 FoxNC working right Now had to change Pol to Vert. It took a bit to come in but it's working
This is with a SV8000 on TP 12326 NOT tp12268
fox isn't working on jynxbox and neither is mtv on ch 2581 not sure what others are down as I didn't bother checking
did you change to above settings?Quote:
Originally Posted by anthonym41
Yep doesn't work
sound on mtv but no picture and no luck getting fox news working
hd audio isn't encryptedQuote:
Originally Posted by anthonym41
I don't know what to say but that's what's happening on my end sound on mtv but no pic and nothing on fox news
got mtv back by doing a scan but fox and out tv are now down
Tried what Auggie suggested. Left it for an hour. No luck.Quote:
Originally Posted by auggie
Fox is TP12268 on my SV8K.
I have not had my local news channel CKPG since the changes, I am using the jynx box and have done all the changes as mentioned ie: v to h and 21500 and turbo. I scan the tp on 91 and tells me "no program" very good S&Q on both 91 and 82 for this channel of course 82 gives me sound but no picture that has not changed. note: the tp for 91 is 12239/H/21500. Am I missing something trying to get it to come in ?? Could the channel have been dropped from the providers card? I would like to get my local news channel back, is this possible? should I contact sat9182 to answer this question? Thanks in advance for any help you could provide me.