Some were I seen (How to) on how to bypass 1GB flash card on cw4k. Any info please pass on.:yes:
Printable View
Some were I seen (How to) on how to bypass 1GB flash card on cw4k. Any info please pass on.:yes:
It was her befor the purge . I got a lot of the info but I mist that one mybe someone got it and will repost it.
This is old but here is the info.
OK tried to bypass compact 1GB flash card logged in OK typed (fdisk/dev/hda/user/bin/flash.part) It reply's as (fdisk/dev/hda/user/bin/flash.part not found). any Ideals why.
Read it again fdisk /dev/hda or sda < /usr/bin/flash.part <enter>Quote:
Originally Posted by trimnails
Well I read it again with no luck typed it exactly as you have it I tried with spaces no spaces it reply's as.(no such file)Quote:
Originally Posted by Benney
i made it to mount /dev/hda1 /mnt/flash / mount -t iso9660 /dev/cdrom /mnt/cd but mount fail
space in pictures look like above
first u put space fdisk(space) /dev/hda or sda < /usr/bin/flash.part <enter>
mke2fs(space) /dev/hda1 or sda1 <enter>
Got it to mount with space fdisk(space) /dev/hda or sda < /usr/bin/flash.part <enter>
like pbmckenz said. But now I'm stuck on second mke2fs(space) /dev/hda1 or sda1 <enter>replies mke2fs: invalid blocks count-or
Quote:
Originally Posted by pbmckenz
mke2fs(space) /dev/hda1 or sda1 <enter>
work for me on 40 and 20gig hard drive
third part works
forth does not
500 gig hard drive.do you thing that my be the different.
no had 1tb sata that made 2st part step 2
40 and 20gig ide made the same
do not work mke2fs /dev/hda1 or sda1
if u using sata sda2 it should said
Thanks I'll check ever thing out as soon as I get a chance and reply back.
Quote:
Originally Posted by pbmckenz
OK checked ever thing out it is WD1TB hard drive connected to sata port 1, but still can't get past step 2.
have u tried 1.0.1.13 or original cw restore disk i looking for mine
no I tried 1.0.1.15.and 16r1 15 is all i got.
have u looked to see what code is when u load file flashdrive on my tv it cut off left edge will be close to the same
"have u tried 1.0.1.13 or original cw restore disk i looking for mine"
You must start with the box at this os ( 1.0.1.1.13 ) no other add on's . Stock box . Once you get it to work you can do them . If some thing go's wrong you start over. Do not put third party on until last .
Remember if you go to 17.r2 to use 4.22 . There is no advantage to what you are doing for sat viewing . Works fine as is .
i looked for mine and can find it. if u find your can u post it in file
Got this with the way back machine .
tarik2cyprian
Member
Join Date
Jan 2011
Posts
30
Thanks
47
Thanked 47 Times in 21 Posts
CW4000 Clone
Here are the codes to install your cw4000 clone on your IDE harddrive or SATA harddrive.
hda means IDE harddrive and sda means SATA harddrive.
1. Load factory Restore CD-ROM
2. When it states compact flash not found press on your keyboard Ctrl + Alt + F2
3. username: root password: admin
4. Enter the commands below
fdisk /dev/hda or sda < /usr/bin/flash.part
mke2fs /dev/hda1 or sda1
mount /dev/hda1 or sda1 /mnt/flash
mount -t iso9660 /dev/cdrom /mnt/cd
tar -xjf /cdrom/zz/rootfs-1.0.1.15-fact-cw-lmc.tar.bz2 -C /mnt/flash/
grub --no-curses < /usr/bin/grubins
umount /mnt/flash
umount /cdrom
reboot
Last edited by tarik2cyprian; 10-09-2011 at 12:07 AM.