Jynxbox ultra hd v4 satellite receiver

JYNXBOX ULTRA HD V4 SATELLITE RECEIVER
Photos
http://s16.postimg.org/6pdkzl9vp/Jyn...pg_200x200.jpghttp://s28.postimg.org/qmuu80atp/Jyn...ltra_HD_V4.jpg

HD satellite receiver Jynxbox Ultra HD
HD satellite receiver
FTA satellite receiver



Jynxbox HD ultra 1080 P receiver W/JB200 HD Module

Full HD 1080P H.264 solution

Embedded Dual Core High performance 400Mhz 32bit CPU

128Mb 16 bit DDRII 800 SDRAM

MPEG-2 video decoder

AVC/H.264 video decoder

MPEG4 ASP supported

JPEG decoding accelerator

Support 4 Video VDAC, can output YPbPr and CVBS simultaneously

Build-in HDMI with HDCP

Support full HD output

MPEG-1 layers I, II and PCM down-mixing

IEC958 S/PDIF digital output

Digital mute control and volume adjustment

Support Dolby down-mixed 2 channel

Support 2 channel HE-AAC V1

Build-in 2 channel Audio DAC

Dual USB 2.0 host interface

10/100 Mbps Ethernet MAC with RMII

Serial RS-232 Interface

1080P HD Multimedia Player w/ Dolby (MKV, XVID, AVI, X264, DivX, MPEG4, H264, FLV, etc...)

MP3 Player and Picture Viewer

Time Shift

WiFi Ready

Twin Tuner Ready

ATSC Ready

UHF Remote Ready

MicroSD Card Slot

USB PVR w/ NTFS Support

External NTFS USB HDD Compatible

Video Upscaling to 1080P

Built in bracket for Wall Mountable solution

IR extender Output

Channel Auto Tune

PVR Timer Scheduler

450mA LNB Output

Multi Scan Support

DVBS2 Tuner Support

Turbo FEC 8PSK/QPSK Tuner support

Blinscan support

Disecq 1.0, 1.1 and 1.2 Support

Software

Full HD 1080P H.264 solution

Embedded Dual Core High performance 400Mhz 32bit CPU

128Mb 16 bit DDRII 800 SDRAM

MPEG-2 MP HL video decoder

AVC/H.264 HP L4.1 video decoder

MPEG4 ASP supported

JPEG decoding accelerator

Support 4 Video VDAC, can output YPbPr and CVBS simultaneously

Build-in HDMI with HDCP

Support full HD output

MPEG-1 layers I, II and PCM down-mixing

IEC958 S/PDIF digital output

Digital mute control and volume adjustment

Support Dolby down-mixed 2 channel

Support 2 channel HE-AAC V1

Build-in 2 channel Audio DAC

Dual USB 2.0 host interface

10/100 Mbps Ethernet MAC with RMII

Serial RS-232 Interface

Universal Remote

650mA LNB Output

IR extender Output

MicroSD Card Slot

Built in bracket for Wall Mountable solution

Supported Connections

1 x HDMI 1.3 A/V out

1 x YPbPr Component output

1 x SPDIF output

1 x CVBS RCA output

2 x USB 2.0 ports

1 x MicroSD/SDHC Memory Slot (up to 32GB)

1 x IR sensor input

1 x 10/100 Mbps Ethernet MAC with RMII

1 x Serial RS-232 Interface

yeah it is a jynx ultra clone with a new faceplate, it is not a jynx box ultra of any version as the ultra has been discontinued

Well at least they bumped the DC current up so it will handle the 3 LNB's from Dish.

Huge clone :) I wonder what bin they use :)

Looks like an improved version of an AZLink, we all knew that Jynxbox Ultra was a thing of the past. Lots of clones running around but this one looks good, must try it if the prize is right. lol

Guy on ebay is selling the Jynx V4 118.99 US Plus Free Shipping he's the same guy that sells the AZLink for 118.99 US and Free Shipping as well

Quote:

---

Originally Posted by Terryl

Well at least they bumped the DC current up so it will handle the 3 LNB's from Dish.

---

possibly Terry, but that could be BS like the rest of the thing hehehe

Quote:

---

Originally Posted by nutzu

Huge clone :) I wonder what bin they use :)

---

I have a bin for it, will post it soon.

No bs amigo, some other thing were also corrected in this clone.

Some pics here,
JynxBox Ultra HD V4 FTA Satellite Receiver
JB200 Tuner ( Already installed )
1.5M best quality 1.4 version HDMI cable
IR Remote cable
Composite Video RCA Cables
WIFI USB antenna
Remote Control

I don't see how it can be a clone if its a jynxbox somebody probably bought the rights for the jynxbox when jynxbox discountinued them.The Jynxbox V4 everyone said it was a clone but the files for it work in all Jynxbox recivers I wouldn't call that a clone

Quote:

---

Originally Posted by holly2012

I don't see how it can be a clone if its a jynxbox somebody probably bought the rights for the jynxbox when jynxbox discountinued them.The Jynxbox V4 everyone said it was a clone but the files for it work in all Jynxbox recivers I wouldn't call that a clone

---

Bin 244 is working on v2,v3 and v4. All boxes working fine. No damage done to any of them.

Works on V1 as well

Quote:

---

Originally Posted by holly2012

Works on V1 as well

---

You do the testing and tell us.............

Lol.........I just told you V2.44 works on V1 as well as V2,V3,V4 guess I should have specified that

Quote:

---

Originally Posted by holly2012

Lol.........I just told you V2.44 works on V1 as well as V2,V3,V4 guess I should have specified that

---

Thank you, that's cool. Now the evidence is completed, 2.44 is not harmful for any Jynxbox Ultra in the market.

i just upgrade from 243 to 244..on v2..works fine so far

Quote:

---

Originally Posted by Angel Eyes

i just upgrade from 243 to 244..on v2..works fine so far

---

I've been on top of my v4 clone, awesome no freezing, clear hd picture and cool as the Beatles singing Hey Jude!!!

i my get one if i find cheap enough...low on pesos

ok...I wanted to be certain on this file 2.44 is safe on all original jynxboxes...I have v2 when I load it says v4...that's normal?...works great on clone...fast EPG, channel changes, & server pickup!

Quote:

---

Originally Posted by TAZ

ok...I wanted to be certain on this file 2.44 is safe on all original jynxboxes...I have v2 when I load it says v4...that's normal?...works great on clone...fast EPG, channel changes, & server pickup!

---

Sure is, just like when you loaded AZlink. Glad to have you guys posting results. Want to know the good ones and the bad also, keep posting.

Quote:

---

Originally Posted by Fibroso

Thank you, that's cool. Now the evidence is completed, 2.44 is not harmful for any Jynxbox Ultra in the market.

---

I beg to differ. I have seen many true jynx's have issues and there was a post today with a member that now has issues....http://www.satfix.net/showthread.php...87#post1038187

Quote:

---

Originally Posted by Anubis

I beg to differ. I have seen many true jynx's have issues and there was a post today with a member that now has issues....http://www.satfix.net/showthread.php...87#post1038187

---

This same person stated this in a post.

Quote:

---

going to record something tonight.dont know about anyone else but when ever i recorded i would get lots of micro freezing.

---

That is with a regular bin, I would say it's not the file but the box that has issues.
Some people brick a box with a regular bin, I've seen it a million times.

Can't argue with the bricking a box with a regular bin. lol

i keep checking mine..i let you know

Quote:

---

Originally Posted by Angel Eyes

i keep checking mine..i let you know

---

Anything new? Had none with my unit, just notice you have to point down a bit for the remote to work but it does work fine. The voltage going to the lnbs is fine, no problems with usb or module. Ahhh very important, display is awesome.

I had to remove my then 244 file from my original jynx...slowed down things like a long time to connect to server freezes often,,,then My final decision was that the remote became unresponsive with the unit while on and off....went back to 239 works great...not as fast as I have seen with the 244 file but I do believe it does something to the box itself...that's too bad because it was good but something going on with it loaded over time...anyone else getting issues?

If your unit is original, 243 should be the firmware for that box. Many people with clones thinking they are originals, Some well built clones and some not so good. The 239 bin is good for all.

Quote:

---

Originally Posted by Fibroso

Anything new? Had none with my unit, just notice you have to point down a bit for the remote to work but it does work fine. The voltage going to the lnbs is fine, no problems with usb or module. Ahhh very important, display is awesome.

---

no problems ..non what.so.ever..works great..if was any problems should show by now...

I bought this jynx v4 knowing it is a clone as a replacement for my linkbox, that went down after 5 months of use. I think it is an excellent box; the remote control is weak, it has to pointed to the box for it to work. I'm planning on buying another one.

Quote:

---

Originally Posted by r\rafa

I bought this jynx v4 knowing it is a clone as a replacement for my linkbox, that went down after 5 months of use. I think it is an excellent box; the remote control is weak, it has to pointed to the box for it to work. I'm planning on buying another one.

---

Before you buy the V4 have a look at the new jynxbox V5+, if you buy 5 or more you can get them for less than 65 USD each.

Quote:

---

Originally Posted by Fibroso

I've been on top of my v4 clone, awesome no freezing, clear hd picture and cool as the Beatles singing Hey Jude!!!

---

\So should i get V4plus .. Sounds like it would go smoother than V6

Quote:

---

Originally Posted by freereign

\So should i get V4plus .. Sounds like it would go smoother than V6

---

Both will work fine, the V6 have 650 mili amps of LNB control when the V4 and V4+ have 450 mili amps, TP