Printable View
Hello
Hey is the Nfusion Solaris working without NOI???
Im sorry to say I haven't been using mine or keeping up with the latest news since I bought a Dreamlink.
But if there is a new bin that works without NOI, I'd love to give it a try.
Can you please direct me to new files, if they are available please.
Thanks for your help
TUBBS
new file called goo3 works without computer but you will need a compatible router.. read up n it.. does work great...
I just loaded the 5.04 bin...seem to me that that will work since I have Ethernet close to my box.... I don't need the wireless hookup.Quote:
Originally Posted by mechanicman
Thanks for your help
Ahh, but you will have less aggravation & headaches if u use goo3. In the long run that is.
Ya, maybe your right. But now I have to fiddle with a router, and loading still another program or two in the router...It seems some peeps have had luck with the 5.02, 5.04 and Oeciks..... I thought oeciks was just for only a certain PS?Quote:
Originally Posted by Newfygarge
if you have no luck(if programming your router is not your cup of tea) with goo, there's another program that works too, NOT using NOI! Only has room for two iks providers though.
Would you care to elaborate...which other file would that be...I have tried 5.04 and just get update system message...Cheers!!!!Quote:
Originally Posted by cmangle
http://www.satfix.net/showthread.php...ian-s-bin-quotQuote:
Originally Posted by ammo
check that out... I woulden't use the 5.04 bin.....It diden't work for me as well.
i read the post after yours about the "check this out" link. all that the single comment in that link says, is that the 5.04 "IS LIKE" brians bin! yeah and ?? so what ?Quote:
Originally Posted by ammo
i've know of quite a few who have used the 5.04 on their nFusions (nova,solaris,phoenix) and they have worked fine.
if you're getting a update message you're doing something wrong.
the "GOO" will work on all nFusions including the HD box (which the extreme 5.04 won't). I personally have not run goo on any of my friends nFusions. Thats not to say it doesn't work or that it doesn't work well! You need to be a little more adept with your router thats all.
hope this helps
I bricked my router so now it's back to NOI for me.
Unbricking a router is only more fun. By the way did it die right after you sent it the kill bin?
Thats what i was referring to, changing your routers function can be a tricky thing. for some its easy as pie, others not so.Quote:
Originally Posted by tubbs
As far as 504 you MUST be doing something wrong, it works fine for MANY others. I'll c/p the loading instructions I use. try again, noi CAN be a real pain in the A$$, on top of the fact your computer is involved as well!
Xtreme Instruction for Nfusion SD Only
- If you are already using NOI bin, start with step 5 (start with step 1)
- If you are already using Nfusion 58W bin, start with step 7
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Load this file 090928 sol phoenix sd v153 1 (Maint. release) in MAIN mode.
5. Load the file named boot_126.bin.in BOOT mode.
6. Load the file named nfusion_factory_U17.bin in BOOT mode.
7. Load the file named XSTV4.14.bin in MAIN mode.
8. Load the file named IKSPRv5.04.bin in MAIN mode.
9. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default
10. Now Menu TO Newcamd Setting > Server Info>OK> 5585 Enter your info “C” button – clear “i” button – cap / small letters / number Menu button - previous menu When doing url leave second one blank Same as password and username and port to leave second one blank. When doing DNS make sure you do 2 number then a space and so on Like this... 01 02 03 04 05 06 07 08 09 10 11 12 13 14 After entering info hit menu couple times.
11.Scan your sats...set time etc.
12. Confirm that switch port assignments for sats are saved. Sometimes it doesn’t get saved.
13. Set a valid channel w/good signal
14.Turn OFF from rear switch and turn ON again <- Very important
15. Wait Couples of second and you’ll get TV By XtremeServiceTv Notes: Normally, power on / off through remote fixes hanging. It might take some seconds before TV shows up after receiver is put off / standby mode. You might need to do channel hopping to get TV. Favorite doesn’t work. Channel lock doesn’t work properly. Only Blind Scan is available for scanning. There’s no option for sat 118W but sat 61.5W is available. There are some minor bugs in the software but it works quite well.
[QUOTE=cmangle;1031179]Thats what i was referring to, changing your routers function can be a tricky thing. for some its easy as pie, others not so.
As far as 504 you MUST be doing something wrong, it works fine for MANY others. I'll c/p the loading instructions I use. try again, noi CAN be a real pain in the A$$, on top of the fact your computer is involved as well!
Xtreme Instruction for Nfusion SD Only
- If you are already using NOI bin, start with step 5 (start with step 1)
- If you are already using Nfusion 58W bin, start with step 7
1. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
2. Load this file u48 factory file from July 2009 also in BOOT mode.
3. Load this file next... boot file v.130 also in BOOT mode.
4. Load this file 090928 sol phoenix sd v153 1 (Maint. release) in MAIN mode.
5. Load the file named boot_126.bin.in BOOT mode.
6. Load the file named nfusion_factory_U17.bin in BOOT mode.
7. Load the file named XSTV4.14.bin in MAIN mode.
8. Load the file named IKSPRv5.04.bin in MAIN mode.
9. Do a factory default <- very important! Menu > Newcamd Setting > Factory Default
10. Now Menu TO Newcamd Setting > Server Info>OK> 5585 Enter your info “C” button – clear “i” button – cap / small letters / number Menu button - previous menu When doing url leave second one blank Same as password and username and port to leave second one blank. When doing DNS make sure you do 2 number then a space and so on Like this... 01 02 03 04 05 06 07 08 09 10 11 12 13 14 After entering info hit menu couple times.
11.Scan your sats...set time etc.
12. Confirm that switch port assignments for sats are saved. Sometimes it doesn’t get saved.
13. Set a valid channel w/good signal
14.Turn OFF from rear switch and turn ON again <- Very important
15. Wait Couples of second and you’ll get TV By XtremeServiceTv Notes: Normally, power on / off through remote fixes hanging. It might take some seconds before TV shows up after receiver is put off / standby mode. You might need to do channel hopping to get TV. Favorite doesn’t work. Channel lock doesn’t work properly. Only Blind Scan is available for scanning. There’s no option for sat 118W but sat 61.5W is available. There are some minor bugs in the software but it works quite well. [/QUOTE
Thanks cmangle...Eventhough I have purchased a router I will give this a try..seems a wee bit different than the file I used from another site...Cheers!!
Well I tried what you described and I do not see the sats for bev.....is this normal....Cheers!
Okay got the sat list now...did a factory reset....did the info stuff...I checked the internet connection..all info filled in and changed to static....but still get udate system nag......any ideas....Cheers!!!...I am waiting for my linsky router v8 flashed already with ww-drt...but it would be nice if this file is still working to at least get it up and running....I will recheck everything again....on entering server info and put in 0000 I see r3x 1.26 iksprtv team 5.04 crc checked..any other ideas please chime in.....Cheers!Quote:
Originally Posted by ammo
Do a default install old dns files do a default then install all the files the 10 steps or files up to 5.04
hi Do a default install old dn file defualt instal the ten stepsQuote:
Originally Posted by ammo
I'm at that stage too, i have the system update notice, but I can't find the 5.04 file...
Anybody help here... thanks...
missin my porn in the bedroom...lol
YES, E2000 router died right after the Goo binQuote:
Originally Posted by Newfygarge
The kill bin is used before the goo bin. Sometimes after applying the kill bin u can't get IP's to respond on the router, but u might be able to send a bin using TFTP or TFTP2 to the router, and vola working again.
Quote:
Originally Posted by tubbs
Ya, I have been trying to load the factory bin back on the router, but all I get is ttl=100. when I would do theQuote:
Originally Posted by Newfygarge
ping -t command then try to load the bin with Lynksys tftp file.
I even tried to do a "PUT" command.
Both tries would say complete, but it still wont come out of the power light blinking fast. I have tried dozens of times both ways.
It seems as though the goo system, even with the"Goo for Dummies" tutorials, can be very tricky to implement. Granted when it's right it works good(especially for the Nuvenio HD) but getting there can be a interesting ride! I've known, heard of, a few people who have bricked there routers though.
The 504 system seems to work fine for me even though there is only room for two providers. Although the NOI was all there was at one time, Goo and 504 are vast improvements over the NOI and the dedicated computer system.
my two cents
AHHHHHHHHHHHH success at last. I have A Solaris that would not work on anything NOI, goo, extreme bins, nothing. Apperently it was the Nfusion factory U17 bin, which was causing all the grief. This is what I did to get it going.Finally ever since last June I've been trying to get it going.
1.Load the boot_r3x_to g3x_v1.33.bin file in BOOT mode.
2. Load the boot_g3x_to r3x_v1.23.bin file in BOOT mode.
3. Load this file u48 factory file from July 2009 in MAIN mode.
4. Load this file next... boot file v.130 also in BOOT mode.
5. Lastly load this file 090928 sol phoenix sd v153 1 (Maintenance release) in MAIN mode.
5. Then load newest file which is nfusion-154.2-255.bin, for NOI or goo3./ Or load your favorite Extreme bin. In main mode
Watch your receiver while putting in the bins. After 100% make for sure it says Up da then good. If you don't get that do that step again.
Of course do this at your own risk. It worked for me.
There is the nfusion 69 file that is working without computer or router setup.For sd receivers only.
alsome the bin ikspr5.02 is working 100% up
any idea where I might find this 69 fileQuote:
Originally Posted by runamok
I looked in file section but not there
Thanks
i followed all the instructions that was posted to load nfusion solaris listed above did all the ps info sats and everthing still getting update error i dont want to use noi or any router method i just want a stand alone method..can someone please walk me thru this to get it up n running thanks in advance..
why does file 5.02 work with my solaris but not my Phoenix
Everything work good till after (6. Load the file named nfusion_factory_U17.bin in BOOT mode.)and when O load the - IKSPRv5.02.bin - or the- IKSPRv5.04 .bin - It shows something like (( 900G )_ on the receiver display , and the receiver freezes up ,then when I put the nfusion_factory_U17.bin in again I get back t menu . Am I missing something ?or is there an easier way to get the phoenix to work.Quote:
Originally Posted by cmangle
is 5.04 bin still working