Discuss this topic here....Upon pressing the guide button and pressing FAV, it takes a couple of minutes to load but when it does it's a full guide, enjoy...
Printable View
Discuss this topic here....Upon pressing the guide button and pressing FAV, it takes a couple of minutes to load but when it does it's a full guide, enjoy...
When you load the file do you load with all code + boot code,thankyou.
Once you load this file, can we load back our old data channel list.
Tried to load back old data channel list on top of this new file, it loads but the version in the info reverts back to 810.
Also is there away to save server information, so you do not need to input the server info every time there is a new file.
Also does this bin fix the issue of when selecting the channel in the epg, you can not select it by pressing ok, you need to select exit button to get the channel.
Also does if fix the audio lag (delay) issue?
Yes. I also noticed I was having a prob scanning 129 and getting the channel names to show up, only had numbers but this time all the channels names showed up.
What did you load your file with.
yes.....all code + boot. USB stick.
Flashed 819, factory default, flashed channel list and setup server. I have a full guide and info showing 819 not previous file.
Attachment 21063
Thanks.
I must have done something wrong. Did you just download the channel list or all data? Also did u have to input the server info again. If so is their no way to save a server info. file?
I down loaded all data and that may be the problem. When u download all data the server info is also downloaded with it. However the names for the favorites gets defaulted to the original names and also the software version defaults back to 810.
Hi , I bought a nanosat HD tv and I was ondering how I get the 119 and 110? they are not on the sat list? I download the v105 factory file first and then the 819 new bin , factory reset and I still dont get the 110 and 119 satellite. Any help? thanks.
does this new file give you a bev epg?
I had to re-input all server info.Quote:
Originally Posted by danny
You need the v106 factory file which I didn't see posted here. I'll do it later if I get a chance. You could also just load v105 then flash 810 file and set up your sats and save all info to usb before reflashing the 819 file.Quote:
Originally Posted by xxxjrxxx
Only being used for charlie in my case.Quote:
Originally Posted by Irish
Factory file not needed..just load 819 and (all code + boot) then factory default and do your sat setup and server info.
then watch TV...this receiver is getting better...they have promised new fixes next week,so let see what happens!!
hy does anyone know where to find the v106 factory file for nano hd,and is it importend
My neighbor said you only need the 819 file posted recently... gl budQuote:
Originally Posted by filippo
epg works great for bev and charlie now...thanks nano team
Is there anymore improvements other then the epg. I have not had any problems with the file epg. Did they correct the audio delay?
Does this bin fix the issue of when selecting the channel in the epg, you can not select it by pressing ok, you need to select exit button to get the channel?Quote:
Originally Posted by notch67
The audio delay is still an issue when you exit the guide.Quote:
Originally Posted by Bill
No issue selecting a channel by pressing the ok button while in the epg.Quote:
Originally Posted by danny
Is there a loader for this receiver. My receiver is not booting, it keeps on flashing "on" and "error" but no picture. I want to load back the factory file. Which loader do I use?
Never mind. The Jynxbox loader with Null cable works.Quote:
Originally Posted by danny
Selecting the channel from the guide issue still not fixed with 819. You still need to select the exit button to go to that channel.Quote:
Originally Posted by Costactc
I realise that. You had mentioned pressing ok in the guide would not change the channel which I found odd as I had never had that problem. Lets say this receiver, as almost all once released, is a work in progress.Quote:
Originally Posted by danny
Interesting,Quote:
Originally Posted by notch67
There is still no epg for bev.
819 not wrkng after dawnlading from file section
After you download the file, you have to extract it with either winzip or winrar before you transfer it to USB, after that is done you should select all code + boot code in Menu. glQuote:
Originally Posted by Snow
Problem extracting 819 ra file on windows 7.When downloading to computer it shows a squire page instead of a stack of books? Disregard. Had to download the ra program.
I have the channels (118/119) scanned, but they are listed sequentially and not using their SID (actually channel numbers).
Could anyone help me get the channels sorted using their actual channel numbers?
Is it next week yet???Quote:
Originally Posted by gilbuilt
There was next bin week after but not public and two more after that:no:Quote:
Originally Posted by amok
WHY WAS IT NOT PUBLIC :confused:Quote:
Originally Posted by ftv
there is one thing they can fix or add renumbering for bev like the nano premium se
I agree. Cause there support sucks.Quote:
Originally Posted by filippo
it realy sucks the box is good and the picture quality is realy good if the support comes on they may have the best hd box and their sales will increaseQuote:
Originally Posted by #1tiny
Good Box ,great audio/vid, but I think their support walked us down the isle again, and this time the didn't kiss us first. lol lol lol
Hi folks, I was able to setup a nanolite and I just bought a nano HD and I don't know where to start to set it up. the menu is different from the nano lite. I don't have much experience and I was wonder if there a list of steps A to z.
Any help is much appreciated.
look in files/guides sectionQuote:
Originally Posted by lappitto
Obviously this helpful hint is useless because if the poster had looked in the files section it would have been obvious that there are no guides for this receiver. It has some redeeming qualities, but the support to date is lame because there are many simple fixes that would have quickly made it a serious contender. Something tells me this receiver isnt going to be around too long. It is mainly being sold in Canada which may be why the support has been limited.Quote:
Originally Posted by dishuser
then make a setup guide and be usefulQuote:
Originally Posted by amok
Sorry.... but I dont pretend to be an expert, and my Nano is parked waiting for a better software release.... if it ever arrives.Quote:
Originally Posted by dishuser