on or off

Printable View

05-29-2015, 11:56 PM
preet3

on or off

hi I have viewsat max hd power blanking on or off no display . how I fix? thanks
05-30-2015, 12:36 AM
whoknows

Try unhooking the coax(antenna)
05-30-2015, 01:47 AM
preet3

I try still power blanking
05-30-2015, 02:30 AM
whoknows

Did you unplug the box for a bit with the antenna disconnected?
05-30-2015, 03:03 AM
preet3

Quote:

Originally Posted by whoknows

Did you unplug the box for a bit with the antenna disconnected?

yes I did unplug box and antenna disconnected still same
05-30-2015, 09:24 AM
whoknows

http://www.satfix.net/showthread.php...om-a-Boot-Loop
06-01-2015, 02:51 AM
jets

Your power supply probably has a bad cap or two in it. Open the cover and look at the power supply board.
06-03-2015, 02:05 AM
preet3

Quote:

Originally Posted by jets

Your power supply probably has a bad cap or two in it. Open the cover and look at the power supply board.

how I check power supply board.thanks
06-03-2015, 02:06 AM
dcapper

Quote:

Originally Posted by preet3

how I check power supply board.thanks

Look at the capacitors. These units have cheap caps. Look for a bulging cap. If you find one, replace them all. Make sure you get the polarity right.
06-04-2015, 12:57 AM
preet3

Quote:

Originally Posted by dcapper

Look at the capacitors. These units have cheap caps. Look for a bulging cap. If you find one, replace them all. Make sure you get the polarity right.

I need help where I find bulging cap .thanks
06-04-2015, 01:24 AM
Anubis

Quote:

Originally Posted by preet3

I need help where I find bulging cap .thanks

Remove the cover of your box and look for as Sesame Street used to say... Which one of these things doesn't look like the other.
Seriously though, a bilged cap looks like a small battery affixed to the main board and is not uniform in length but looks fat hence the term "bulged".

If in doubt, take a picture of the board and post it. I am sure there is lot's of help available here.
06-04-2015, 01:54 AM
grub

Quote:

Originally Posted by preet3

I need help where I find bulging cap .thanks

Seriously speaking if you are unable to identify a bulging cap I would not recommend that you touch that receiver.
Please unplug it and take it to someone that is competent to do the necessary repairs.
06-07-2015, 03:51 PM
preet3

hi when I remove SK200 8PSK card my receiver no power blanking , I buy other sk200 8psk card when I put on new card same think power blanking my receiver. how I fix? thanks.
06-08-2015, 01:04 AM
jets

THE POWER SUPPLY IS BROKEN.... daa
06-08-2015, 03:20 AM
preet3

Quote:

Originally Posted by jets

THE POWER SUPPLY IS BROKEN.... daa

thanks for info
06-10-2015, 04:35 AM
blasta

Hmm luncky i stumble on this :tehe:

This is your fix mate
You need a USB KEY Format(Fat32)

(1) Create a folder called "USB" On Memory Stick (With CAPS !!!)

(2) Download the latest bin, which will be PFTAHDMSW-081014HM.peg (for example) Be Sure to Extract file, then move to next Step.

(3) Rename the bin file to PFTAHDMSW.peg

(4) Place this file PFTAHDMSW.peg in the USB folder On Memory Stick

(5) Plug the Memory Stick in USB slot on the VSMAXHD. (TRY BOTH IN CASE ONE DON'T WORK !)

(6) Turn off from back, wait a minute, then turn it on and it will take and load the file.

(7) Take off the USB key (or it will bee in a loop formating everytime)

(8) No need to THANKS !

(9) THANKS Satfix !